Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
When you spend time on long drives or travel through remote areas in a GMC Acadia, having a dependable fuel backup can prevent being stranded. Choosing the right jerry can affects how much extra range you carry, how safely the fuel is stored, and how easily you can mount and access the container on your vehicle. This guide presents five shortlisted jerry cans chosen for practical use with the GMC Acadia, highlighting capacity, mounting options, and material tradeoffs. Read on to see which features matter most when adding portable fuel storage to your vehicle.
Looking for other parts? See all GMC Acadia parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | HQ Company Replacement Jerry Can Spout for 5-Gallon Military/Blitz Cans |  |
| Best Quality Built to a higher standard if you want something more solid | Mayouko Lockable 20L Steel Jerry Can Holder Rack |  |
| Best Budget The cheapest option that still gets the job done reliably | WINMAX Alloy Steel Jerry Can Holder for 5-Gallon Can |  |
| Most Sold A high-volume bestseller chosen again and again | MCCKLE Jerry Gas Can Holder with Combination Lock for 5-Gallon Steel Jerry Can |  |
| Best Overall The best all-around choice for most situations | Racewill Lockable Jerry Can Mount Holder for 5 Gallon Cans |  |
1. HQ Company Replacement Jerry Can Spout for 5-Gallon Military/Blitz Cans
| Fits opening | 2 1/4 inch |
|---|---|
| Material | Stainless steel |
| Includes | Gasket and cap |
| Fuel type | Unleaded fuel |
This replacement jerry can spout is a threaded, flexible stainless steel pourer made to replace the original spout on U.S. 5-gallon military and Blitz metal gas cans. It screws into the 2 1/4" opening and includes a rubber gasket and sealing cap to reduce drips and fumes during filling and pouring. In practice it makes transferring unleaded fuel from a military-style can easier and more controlled than using a bare opening, and the flexible neck helps when aligning the spout to a vehicle filler or secondary container. Several buyers report secure, leak-free fits but a minority have experienced separation of the spout from its base under heavy tilt, so careful handling while pouring is advisable. The metal construction promises better wear resistance than cheap plastic spouts, but assembly and long-term joint strength can vary between units. For owners of a GMC Acadia using a 5-gallon military-style metal jerry can for occasional refueling or backup fuel, this spout is a practical way to restore factory-quality pouring without replacing the whole can.
Best for: Practical, reliability-focused drivers who keep a metal 5-gallon jerry can as emergency or trail fuel for a GMC Acadia and prioritize a durable, reusable pouring solution.
Less Ideal for: If you do not use a 5-gallon military-style metal jerry can or need a sealed safety can for long-term fuel storage, this spout alone is not the right upgrade.
- Fits standard 2 1/4" opening on U.S. 5-gallon military and Blitz metal jerry cans
- Stainless steel flexible spout offers more durability than typical plastic pourers
- Includes gasket and cap to reduce leaks and vapors during storage and pouring
- Some users reported the spout separating from the base during aggressive tilting or heavy pours
- Not a complete gas can so compatibility depends on using a matching military-style 5-gallon metal can
Verdict A simple, metal replacement spout that restores controlled pouring for 5-gallon military-style jerry cans but requires careful handling to avoid joint failure.
2. Mayouko Lockable 20L Steel Jerry Can Holder Rack
| Capacity | 20 Liters |
|---|---|
| Manufacturer | Mayouko |
| Batteries required | No |
This Mayouko holder is a simple, lockable steel rack built to secure a 20L (5.3 gallon) NATO-style jerry can to a vehicle. It mounts with multiple pre-drilled points and ships with stainless steel screws to resist rust, and the top ring and strap let you add a padlock for theft protection. For use on a GMC Acadia it provides a low-profile way to carry an extra steel fuel can on a roof rack, hitch-mounted carrier, or inside a cargo area when you need extended range for long trips. Installation is straightforward and the pre-drilled holes make aligning to flat surfaces easy, but the unit is only the holder so you must supply a compatible NATO-style can and mounting hardware appropriate for your Acadia. Some buyers report the outer ring can bow under very aggressive off-road use, so it is best suited to highway and mild overland use rather than heavy off-road abuse. The result is a no-frills, secure mounting solution that trades the convenience of a full bracket system for a lighter, adaptable steel carrier you can lock and position where you need it in the Acadia.
Best for: Performance-oriented drivers who prioritize secure, factory-quality fuel carriage for longer Acadia trips and want a durable, lockable solution that can be mounted where it fits their setup.
Less Ideal for: Buyers seeking an all-in-one fuel system, a rubberized or freestanding can mount, or those who plan aggressive off-road use that subjects the holder to heavy flexing.
- Lockable design accepts a padlock for theft deterrence
- Made from cold-rolled steel with stainless screws to reduce corrosion
- Pre-drilled mounting points for quick, repeatable installation
- Fits standard 20L NATO-style steel jerry cans used for extended range needs
- Only the holder is included so a compatible jerry can and additional mounting hardware are required
- Not designed to be freestanding and may need reinforcement for severe off-road use
Verdict A lockable, steel 20L jerry can holder that gives the GMC Acadia a secure, low-profile way to carry spare fuel when you supply a compatible can and avoid extreme off-road abuse.
3. WINMAX Alloy Steel Jerry Can Holder for 5-Gallon Can
| Material | Alloy Steel |
|---|---|
| Capacity | 5 Gallons |
| Automotive Fit Type | Universal Fit |
This steel jerry can holder is a simple, budget-friendly way to carry an extra 5-gallon fuel can on a GMC Acadia for road trips or emergency range extension. It mounts using pre-drilled holes and common fasteners so you can attach it to a roof rack crossbar, rear bumper mount, or a cargo carrier when using Acadia-compatible mounting points. The full-metal construction and powder-coated finish provide basic corrosion resistance and a rigid cradle that keeps the can in place. A lockable top strap helps prevent theft and the design accommodates NATO-style and many commercial 5-gallon cans, though some users report the strap or a locating tab may require minor trimming or adjustment for perfect fit. Expect solid value for the money but plan on light modification or shimming for nonstandard cans and double-check clearance if using a covered cargo area on the Acadia. If you prioritize a low-cost, sturdy holder and can tolerate small fit tweaks, this does the job well.
Best for: Value-oriented Acadia owners who want an inexpensive, sturdy way to carry an extra 5-gallon fuel can for occasional long trips or emergency backup without paying for premium mounts.
Less Ideal for: Drivers seeking a factory-quality, bolt-on solution with guaranteed fit or corrosion-proof marine-grade finishes should consider higher-end, vehicle-specific carriers instead.
- Full metal construction provides a rigid, durable cradle for 5-gallon cans
- Powder-coated finish adds corrosion resistance for outdoor use
- Lockable top strap secures the can against movement and theft
- Pre-drilled mounting holes enable attachment to common rack or bumper mounts
- May require minor trimming or modification for some can lid designs to allow the strap to latch
- Fit and weld alignment vary by unit which can need adjustment during installation
- Not finished to premium tolerances and can show internal surface rust over long-term exposure
Verdict A budget-friendly, heavy-duty steel holder that secures a 5-gallon can for the GMC Acadia but may need small fit tweaks and careful mounting.
4. MCCKLE Jerry Gas Can Holder with Combination Lock for 5-Gallon Steel Jerry Can
| Capacity | 5 Gallons |
|---|---|
| Manufacturer | MCCKLE |
| Batteries required | No |
This MCCKLE jerry can holder is a bolt-on mounting rack designed to carry a 5-gallon steel jerry can on a vehicle. Built from cold-rolled steel with a black powder coat, it clamps the can in a fitted bracket, secures the top strap with a provided 4-digit combination lock, and includes the installation hardware. Typical use is vehicle-mounted fuel carry for road trips, overlanding, or emergency backup on a GMC Acadia where extra portable fuel is needed. The steel construction and rubber strip at the base protect the can and resist corrosion in outdoor conditions, while the included lock and detachable carrier add theft deterrence and easy removal. Installation is straightforward and uses common tools so you can bolt it to an Acadia mounting point or cargo-area anchor without welding. Limitations are the basic combination lock that some buyers consider thin and the rack is sized for standard 5-gallon steel jerry cans only, so different container shapes may not fit securely.
Best for: Risk-averse mainstream buyers who prioritize secure, factory-quality fuel carry and want a straightforward, bolt-on solution for carrying emergency or extra fuel on their GMC Acadia.
Less Ideal for: Buyers who need to carry nonstandard containers, flexible fuel bladders, or who require high-security locking solutions should consider alternatives.
- Heavy-duty cold-rolled steel construction for durable on-vehicle use
- Black powder-coat finish resists rust and outdoor exposure
- Includes combination lock and installation hardware for immediate mounting
- Rubber strip at the base cushions the can and reduces wear
- Detachable carrier design enables quick removal and transport of the can
- Provided 4-digit combination lock is lightweight and may not deter determined thefts
- Designed specifically for standard 5-gallon steel jerry cans so odd-shaped containers may not fit
Verdict A sturdy, bolt-on jerry can rack that gives GMC Acadia owners a simple, lockable way to carry a 5-gallon steel fuel can, though the included lock is basic.
5. Racewill Lockable Jerry Can Mount Holder for 5 Gallon Cans
| Mounting Type | Wall Mount, Corner Mount |
|---|---|
| Compatibility | 5 gallon NATO-style jerry can |
| Finish Type | Powder Coated |
| Manufacturer | Racewill |
This Racewill mount is a welded steel bracket intended to hold a standard 5-gallon jerry can and keep it secure on a vehicle or in a garage. It installs as a wall or corner mount and uses a U-bayonet style lock ring plus stainless security screws to reduce theft risk. Typical uses are truck-bed or rear cargo mounting for extra fuel or water on long trips and overlanding. The powder-coated finish and full cold-rolled steel construction give it solid corrosion resistance and reviewers report it stays sturdy on the road. Practical benefits include a detachable top retainer for quick can removal and a compact footprint that saves space in the cargo area. Important limitations are fit sensitivity and hardware omissions: the holder is sized for specific 5-gallon NATO/Scepter-style cans and some brands will not seat correctly, and the kit does not include through-bolts or threadlocker so you may need to source hardware and secure fasteners against vibration. Mounting in uneven locations can be fiddly and a few users found the metal thinner than expected.
Best for: Buyers looking for a balanced, reliable way to carry an extra 5-gallon fuel or water can on their GMC Acadia who prioritize security and a compact, vehicle-friendly mounting solution.
Less Ideal for: Avoid this if you plan to carry nonstandard or oversized fuel containers or if you want a fully finished kit that includes all mounting hardware and vibration-proofing accessories.
- Lockable U-bayonet and stainless security screws provide theft deterrence
- Powder-coated cold-rolled steel resists corrosion in outdoor use
- Detachable top retainer allows relatively quick removal and replacement of the can
- Designed specifically for 5-gallon NATO/Scepter-style jerry cans so fit is secure for compatible cans
- Does not include mounting bolts or hardware so you must supply suitable fasteners
- Fit is specific to certain 5-gallon can designs and some metal cans may not seat correctly
- Some panels are fairly thin which can require reinforcement for heavy-duty or high-vibration use
Verdict A practical, lockable steel mount that works well for compatible 5-gallon cans on a GMC Acadia but requires you to provide hardware and verify can fit before buying.
Choosing the Right GMC Acadia Jerry Can: Key Factors to Consider
Capacity and Range
Capacity determines how much extra distance you can carry and directly affects vehicle weight and storage space. Smaller containers are easier to stow and handle but provide less emergency range, while larger containers increase range at the cost of added bulk and weight.
Think about how far you typically drive between refueling opportunities and whether you need one large container or multiple smaller ones. Also consider interior trunk space and exterior mount locations on the GMC Acadia when choosing capacity so the container fits securely without obstructing access or visibility.
Material and Durability
Materials like steel and heavy-duty plastics offer different benefits and tradeoffs. Metal containers tend to resist punctures and abrasion but can corrode if not properly treated. Plastic containers resist rust and are lighter, but they can be more vulnerable to UV degradation or cracking over time.
Durability affects long-term safety and maintenance. Evaluate the material's resistance to impact, temperature changes, and exposure to road salt or gasoline vapors. Durable construction also reduces the chance of leaks during normal handling and mounting on a vehicle.
Sealing and Venting
A reliable sealing system prevents leaks, reduces vapor loss, and limits fire risk. Look for secure caps with gaskets and locking mechanisms that stay tight under vibration. Proper venting is also important for safe pouring and to prevent pressure buildup that can stress seams or cause spills.
Venting solutions that allow controlled airflow during dispensing make refueling easier and safer. Poor seals or lack of venting increase the chance of drips and fumes, which can be hazardous in an enclosed trunk or near hot engine components.
Mounting and Handling
How you secure the container on or in your GMC Acadia matters for safety and convenience. Consider whether you will store the container inside the cargo area, mount it on a roof rack, or attach it to an exterior carrier. Handles, straps, and purpose-built mounting points make carrying and securing the container easier.
A container that is awkward to lift or lacks stable attachment options can shift during driving, increasing the risk of damage or spills. Choose containers with predictable balance when full and features that integrate with common vehicle mounting solutions.
Pouring and Transfer Features
A good pour spout or transfer system reduces spills and makes refueling quicker. Built-in spouts, flexible hoses, or pump-ready fittings each have pros and cons: rigid spouts are simple, flexible hoses reach recessed tanks, and pump-ready fittings allow faster transfers without tilting the container.
Consider how you typically refuel and whether you need a child-resistant or locking spout. Ease of use during pouring is especially important to avoid fuel loss and to keep the vehicle area clean and safe.
Safety and Regulatory Considerations
Fuel transport is subject to safety guidelines that affect container design and labeling. Look for containers designed to minimize vapor release, to resist ignition, and to meet recognized performance or safety standards where applicable. Features such as flame mitigation, child-resistant caps, and clear labeling help mitigate risk.
Also factor in rules about storing fuel in vehicle cargo areas and take sensible precautions such as securing the container upright and away from heat sources. Choosing containers with visible capacity markings and warning information improves safe handling.
FAQ
How much extra fuel should I carry in a GMC Acadia?
The right amount depends on typical driving distances and how remote your routes are. Many drivers carry one to two containers that add 2 to 10 gallons of range. Balance the extra range you want against available storage space and the added weight so handling and vehicle load limits are not compromised.
Is a metal or plastic jerry can better for vehicle use?
Both have advantages. Metal cans are generally more impact resistant but can corrode if exposed to moisture. Plastic cans resist rust and are lighter, though they can degrade over time from UV exposure. Choose based on how you plan to store the container and the environmental conditions you expect.
Where is the safest place to store a fuel container in my GMC Acadia?
Secure the container upright in the cargo area or on an approved exterior mount, away from heat sources and vents. Make sure it is restrained so it cannot shift during driving. Avoid storing loose containers in the passenger cabin where fumes could accumulate.
Do I need a vented spout or special pouring equipment?
Vented spouts or transfer hoses make pouring smoother and reduce glugging and spills. If you frequently top off tanks, a vented spout or a pump attachment can save time and minimize spills. Ensure any accessory fits the container and the vehicle's fill point securely.
How should I maintain a jerry can to ensure long life?
Rinse and dry containers after use if storing different fuel grades and periodically inspect for cracks, corrosion, or degraded seals. Keep caps and spouts clean and store the can out of direct sunlight when possible. Replace any worn gaskets or damaged components promptly to prevent leaks.
How We Chose the Best GMC Acadia Jerry Can
We focused on real-world fit and function for use with a GMC Acadia and selected products that perform well in common driving scenarios. Primary criteria included capacity ranges suited to passenger SUVs, secure mounting or carry options that work with common rack and trunk setups, and material durability for resistance to corrosion and impact. We also evaluated sealing and spill-prevention features, ease of pouring or transfer, and compliance with basic safety and venting standards for fuel containers. We excluded containers designed exclusively for industrial machinery, boats, or fixed-stationary use, as well as novelty or single-use disposable containers. The final list favors containers that balance vehicle compatibility, safe transport, and convenient handling for everyday drivers and weekend travelers.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right GMC Acadia jerry can comes down to balancing capacity, material, and how you will mount and use the container. Prioritize secure sealing and stable mounting to reduce spill risk, and select a size that fits your vehicle and expected range needs. Remember that every choice involves tradeoffs between weight, durability, and convenience. Focus on the factors that matter most to your trips and storage habits to pick a container that offers safe, practical backup fuel when you need it.
Explore More:
- Check out all GMC Acadia parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
