Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you want a lower ride height and sharper handling for your Dodge Journey, choosing the right lowering springs matters. The correct springs change body roll, steering feel, and ride comfort in everyday driving and spirited turns. This guide covers seven shortlisted options so you can evaluate candidates that perform well in common conditions. We focused on ride quality, drop height, and compatibility with the Journey to narrow the list. Read on for the factors that mattered and what to expect from each type of spring.
Looking for other parts? See all Dodge Journey parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Touring Tech 3" Front Lowering Coil Springs (pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | Touring Tech Performance Series Lowering Springs (TT-D205) |  |
| Best Quality Built to a higher standard if you want something more solid | D2 Pro Lowering Springs for 11+ Charger / 300C RWD |  |
| Best Budget The cheapest option that still gets the job done reliably | maXpeedingrods Lowering Springs, cold-wound steel, front/rear set |  |
| Most Sold A high-volume bestseller chosen again and again | Godspeed Traction-S Performance Lowering Springs (set of 4) |  |
| Best Value for Money The sweet spot between price and what you get | Truhart Lowering Springs Compatible with 2013+ Accord |  |
| Best Overall The best all-around choice for most situations | BMR Suspension SP001R Lowering Springs — 1.25" Drop (set of 4) |  |
1. Touring Tech 3" Front Lowering Coil Springs (pair)
| Manufacturer | Touring Tech |
|---|---|
| Manufacturer Part Number | TT-G208F30 |
| Item Weight | 27.7 pounds |
| Set | Pair, front lowers 3.0" |
These Touring Tech front lowering coil springs are a pair of 3-inch front lowers intended to give a vehicle a noticeably lower stance while retaining usable spring performance. They are powder-coated for corrosion resistance and marketed as performance springs that exceed factory-quality standards. In practice the springs are used to replace the factory front springs and produce a 3.0 inch drop when combined with compatible front suspension components. Buyers can expect a firmer ride compared with stock springs and improved visual stance and reduced front ride height. Notable benefits include the lifetime warranty and robust finish that help with long-term durability. Limitations are typical for lowering springs: a firmer ride, potential need to adjust alignment and front/rear height balance, and fitment checks required for vehicles with modified steering or brake components. Packaging has received occasional complaints about cosmetic paint chips on arrival, so inspect parts before installation.
Best for: Reliability-focused buyers who prioritize a durable, proven lowering solution and want predictable, repeatable results when modifying suspension height.
Less Ideal for: Drivers seeking a soft, comfort-oriented ride or those who need height-adjustable or reversible lowering options should consider other solutions.
- Provides a defined 3.0 inch front drop to change stance and lower center of gravity
- Powder coated finish improves corrosion resistance and appearance
- Sold as a matched pair for consistent front-end ride height
- Lifetime warranty offers long-term coverage against defects
- Generally praised by owners for achieving the advertised drop
- Produces a firmer ride compared with stock springs which may reduce ride comfort
- May require alignment and additional adjustments to level the vehicle front-to-rear
Verdict A straightforward, warranty-backed 3-inch front lowering spring set that reliably changes stance at the cost of a firmer ride.
2. Touring Tech Performance Series Lowering Springs (TT-D205)
| Brand | Touring Tech |
|---|---|
| Model | TT-D205 |
| Vehicle fitment | Dodge Journey compatible |
| Drop | Lowers ~2.2 inches front and rear |
These Touring Tech Performance Series lowering springs are a bolt-in suspension upgrade that drops the vehicle and firms the ride to improve stance and handling on a Dodge Journey. Made from 55 chrome silicon steel, the springs are intended to lower the front and rear by about 2.2 inches and include rear spring isolators and grade 8 hardware for a complete swap. In everyday use they tighten body control and reduce squat and roll, which makes cornering feel more responsive and gives the car a more aggressive stance. Expect a firmer ride over rough surfaces and the usual lowered-vehicle side effects such as reduced suspension travel and the need to check for bump steer or rubbing on large wheels. Installation is straightforward for a competent DIYer with the right tools or a local shop; these springs are a budget-conscious alternative to higher priced name brands. Quality reports vary, so inspect components during install and consider alignment after fitting to restore proper handling and tire wear.
Best for: Convenience-driven buyers seeking an easy, affordable way to lower and sharpen the handling of their Dodge Journey without spending on high-end brands.
Less Ideal for: Drivers who prioritize a plush daily ride or who frequently navigate very rough roads should consider adjustable coilovers or less aggressive suspension options instead.
- Manufactured from 55 chrome silicon steel for durability above typical factory springs
- Lowers both front and rear approximately 2.2 inches for a noticeable stance change
- Includes rear spring isolators and grade 8 hardware for a complete replacement
- Offers improved body control and reduced body roll for better cornering
- Lower-cost option compared with many premium lowering spring brands
- Firmer ride quality can be harsher on rough roads due to reduced suspension compliance
- Some users have reported occasional quality issues or premature spring failure
- May require alignment and minor suspension adjustments after installation to prevent uneven tire wear
Verdict A budget-friendly lowering spring kit that gives a Dodge Journey a sharper stance and handling at the cost of a firmer ride and occasional variability in long-term durability.
3. D2 Pro Lowering Springs for 11+ Charger / 300C RWD
| Material | High Tensile Chrome Silicon Steel |
|---|---|
| Manufacturing Process | Cold-wound and heat-treated |
| Spring Design | Progressive-rate coils |
| Fitment | Direct factory replacement |
| Drop (approx) | Lowers about 1.8" front / 1.4" rear |
These D2 Pro lowering springs swap in like a factory replacement and lower the vehicle to produce a more planted stance and sharper turn-in. Built from high-tensile chrome-silicon steel with cold-wound, heat-treated construction and a corrosion-resistant finish, the springs use a progressive coil design to firm up as compression increases so handling improves without an extreme loss of comfort during normal driving. For a performance-oriented owner they reduce body roll and lower center of gravity for better road response and aerodynamics on daily roads and spirited drives. Installation follows standard spring replacement procedures and may require basic tools or a shop for safe fitting. Expect a firmer ride over bumps compared with stock and potential fitment considerations with larger wheels or tight clearances on some setups. These springs are bench-tested and manufactured in a certified facility, which supports their consistency and durability for performance use on the specified vehicle.
Best for: Performance-oriented owners who prioritize sharper handling and reduced body roll on their Dodge Journey and want a durable, factory-quality lowering spring without moving to coilovers.
Less Ideal for: Drivers who prioritize a plush, comfort-focused ride or who regularly encounter very rough roads should consider softer suspension options or an alternative setup.
- Direct factory-quality replacement fitment for simple swap-in installation
- Progressive-rate coil design improves handling and reduces body roll under cornering
- Heat-treated, chrome-silicon steel construction for consistent spring rate and durability
- Corrosion-resistant finish helps long-term appearance and part life
- Firmer ride quality compared with stock which may feel harsh on rough roads
- May require minor bump stop or clearance adjustments with certain wheel/tire setups
Verdict A durable, performance-minded lowering spring that sharpens handling and lowers center of gravity for Dodge Journey owners willing to accept a firmer ride.
4. maXpeedingrods Lowering Springs, cold-wound steel, front/rear set
| Fitment years | 2016-2024 (listed) for certain models |
|---|---|
| Material | SAE 9254 cold-wound steel |
| Testing | 200,000-cycle fatigue; 720-hour salt spray |
| Compatibility note | Designed to work with factory-style shocks |
These maXpeedingrods lowering springs are an entry-level suspension upgrade that lower ride height and increase cornering responsiveness by reducing body roll. They are cold-wound SAE 9254 steel coils with anti-corrosion coating and are sold as a front and rear set intended for direct bolt-on installation with minimal modification. In use the springs provide a noticeable static drop and a firmer, more controlled feel that suits spirited street driving and improved turn-in. The package claims extensive testing for fatigue and salt-spray resistance, which supports durability expectations for road use. Expect a firmer ride compared with factory springs and potential need to re-tune alignment after installation. These springs are marketed as compatible with factory-style dampers but do not include shock absorbers, so pairing with worn shocks may limit handling gains. For budget-focused upgrades they deliver visible stance and handling improvement; buyers seeking a plush daily ride or track-grade performance should consider higher-end alternatives or matched shock and spring kits.
Best for: Budget-conscious owners who prioritize a lower stance and sharper street handling without paying for a full coilover or matched shock and spring kit.
Less Ideal for: Drivers who want a plush daily ride, precise track-focused tuning, or need a complete dampers-and-springs solution should look at matched kits or higher-end components.
- Cold-wound SAE 9254 steel construction for consistent spring rate and strength
- Anti-corrosion coating and salt-spray testing for improved long-term resistance
- Direct bolt-on design that works with factory-style dampers for straightforward installation
- Designed to lower center of gravity for reduced body roll and sharper handling
- Does not include shocks or strut components so optimal performance may require compatible dampers
- Firmer ride may reduce comfort on rough roads compared with factory springs
- Long-term durability on heavily used vehicles is less proven than premium brands
Verdict A cost-effective way to lower ride height and sharpen handling, but expect a firmer ride and factor in replacing or checking dampers for best results.
5. Godspeed Traction-S Performance Lowering Springs (set of 4)
| Compatible Models | Designed for Volkswagen Jetta (MKVI) 2012–2018 |
|---|---|
| Avg. Drop (Front/Rear) | 1.0" / 1.2" |
| Spring Rate (Front/Rear) | 3.17 kg/mm / 2.66 kg/mm |
| Material | SAE 9254 spring wire |
These Godspeed Traction-S lowering springs are built to lower a vehicle modestly while sharpening handling and steering response. Cold-wound from SAE 9254 spring wire with multi-stage heat treatment, the springs are intended to resist sagging and provide even spring rates for predictable behavior. In use they give roughly a one-inch front and 1.2-inch rear drop, which firms up turn-in and reduces body roll without radically sacrificing daily comfort when left on factory shocks. The powder coat finish helps with corrosion resistance and the set is precision inspected at manufacture. Limitations to consider are that these are designed to work with factory shocks and perform better with upgraded high-performance dampers, and installation can require a shop for safe disassembly of struts and related components. Fitment and final ride height can vary by vehicle and wheel setup so expect minor front/rear mismatch in some cases.
Best for: Practical, risk-averse owners looking for a reputable lowering spring that improves everyday handling and appearance without a radical ride change.
Less Ideal for: Drivers seeking an aggressive track setup or those who want a full suspension overhaul should consider dedicated coilovers or matched shock and spring kits instead.
- Cold-wound SAE 9254 spring wire with heat treatment for improved durability and reduced sag over time
- Moderate drop (approx. 1.0" front, 1.2" rear) that improves handling without an aggressive stance
- Powder coat finish for corrosion protection and longer service life
- Designed to work with factory shocks while offering better results with aftermarket performance dampers
- Not a complete kit—performance gains are limited when used with worn or stock dampers
- May produce a slight front/rear ride height mismatch depending on vehicle and wheel setup
- Installation involves strut disassembly which can be difficult for DIYers and may risk related components if not done carefully
Verdict Solid, moderately aggressive lowering springs that sharpen handling while remaining daily-drivable when paired with appropriate shocks.
6. Truhart Lowering Springs Compatible with 2013+ Accord
| Brand | Truhart |
|---|---|
| Position | Lower |
| Manufacturer Part Number | TH-H410 |
These Truhart lowering springs replace the factory lower springs to lower the car and firm up the ride for a sportier stance. Installed in place of the stock coils, they are used to reduce front and rear ride height by roughly two inches and tighten body roll for improved cornering feel. The kit is marketed as a direct replacement for compatible applications and reviewers report a striking visual drop and sharper handling. Practical benefits include a lower center of gravity, reduced nose dive under braking, and a noticeably firmer ride that many drivers prefer on smooth roads. Downsides are a harsher ride over rough pavement and more challenging front installation that may require a professional or experienced DIYer; some users also noted ambiguity in spring orientation which can complicate fitment. These springs are best when you want an affordable way to lower and firm up handling without moving to adjustable coilovers, but expect compromises in ride comfort and installation effort.
Best for: Practical optimizers seeking the most handling and visual improvement per dollar who prioritize a sportier driving feel and are willing to accept firmer ride quality.
Less Ideal for: Drivers who prioritize daily-comfort on rough roads or want fully adjustable suspension should consider alternatives like softer springs or adjustable coilovers instead.
- Direct replacement lowering springs that noticeably lower ride height and improve cornering response
- Firm spring rate reduces body roll and nose dive for a sportier feel
- Widely reported good visual fit and finish that enhances stance
- Stiffer ride quality transmits more road harshness over rough surfaces
- Front installation can be difficult and may require professional service
- No clear marking for spring orientation which can make correct installation harder
Verdict An affordable way to lower and sharpen handling for a practical optimizer, but expect a firmer ride and potentially tricky front installation.
7. BMR Suspension SP001R Lowering Springs — 1.25" Drop (set of 4)
| Vehicle fit | 1993–2002 Camaro, Firebird (GM F-body) |
|---|---|
| Drop | 1.25 inches (front) |
| Finish | Powder Coat |
| Material | Chrome silicon high-tensile spring wire |
These BMR SP001R lowering springs are designed to lower a compatible vehicle 1.25 inches while increasing spring rate for flatter cornering and improved response. Installed as a four-spring set, they are intended for street performance use where sharper handling and a lowered stance matter more than an ultra-soft ride. The springs are cold-wound from high-tensile chrome silicon wire, stress-relieved and shot-peened for durability, and finished with a powder coat that helps resist corrosion. In practice they reduce body roll and make turn-in crisper, but you will feel more road texture compared with stock springs and some owners report a noticeably firmer ride. Front installation may require spring compression or shop equipment to mate springs to struts, while the rears are generally straightforward. If you need a balanced improvement in looks and handling and can tolerate a firmer road feel, these springs deliver reliable, factory-quality lowering with a lifetime against sag.
Best for: Balanced all-round buyers who want a noticeable handling and appearance upgrade without extreme track-focused stiffness and who prioritize a reliable, OEM-quality replacement that improves day-to-day driving dynamics.
Less Ideal for: Drivers seeking the softest possible ride or an aggressive track-only setup should consider adjustable coilovers or springs tuned specifically for competition use instead.
- Purpose-tuned spring rate for reduced body roll and improved cornering
- Cold-wound, stress-relieved chrome-silicon construction for durability
- Powder-coat finish resists corrosion and keeps appearance clean
- Lifetime warranty against spring sag provides long-term assurance
- Produces a firmer, more road-transmitting ride compared with stock springs
- Front installation may require a press or spring compressor and shop time
Verdict A durable, factory-quality lowering spring set that balances improved handling and looks for everyday driving at the expense of a firmer road feel.
Choosing the Right Dodge Journey Lowering Springs: Key Factors to Consider
Target Drop Height
Drop height determines how much lower the vehicle sits compared with stock. A modest drop of one to two inches usually improves center of gravity and appearance without causing frequent fender rub or scraping, while larger drops can require additional adjustments to bump stops, sway bar links, or ride-height-related parts.
When choosing springs, compare the advertised drop to how you use the vehicle. If you carry passengers or cargo often, a smaller, conservative drop will help maintain clearance. Also consider how lowering affects suspension travel and the potential need for alignment after installation.
Spring Rate and Ride Quality
Spring rate is the stiffness of the spring and is critical for balancing comfort and handling. Higher rates reduce body roll and improve cornering but can transmit more road imperfections into the cabin. Lower rates tend to preserve comfort but may compromise sharper steering response.
Match the spring rate to your driving priorities. If you mostly commute and occasionally drive spiritedly, choose a moderate rate that improves control without making the ride harsh. For performance-focused driving, stiffer springs paired with compatible dampers work better, though that often requires additional suspension tuning.
Fitment and Compatibility
Correct fitment ensures the springs seat properly in the Journey’s struts and control arms and that ride height is predictable. Mismatched or vague fitment information can lead to installation headaches, misaligned geometry, or premature wear of related components.
Always verify that the springs are specified for the Dodge Journey model year and trim you own. Check whether the product requires any modifications, special hardware, or complementary parts such as new top mounts or extended bump stops to maintain safe suspension travel.
Durability and Corrosion Resistance
Lowering springs are exposed to moisture, road salt, and debris, so surface treatments and material quality matter for longevity. Powder coatings, shot peening, and high-grade steel reduce the risk of premature failure or sagging over time.
Consider products with documented corrosion protection and a consistent manufacturing process. Durable springs retain their performance characteristics longer, which helps maintain consistent ride height and handling without frequent replacement.
Impact on Alignment and Tire Wear
Lowering a vehicle changes suspension geometry and often requires a wheel alignment to restore correct camber and toe settings. Without alignment, you may see accelerated or uneven tire wear and compromised handling.
Plan for alignment after installation and choose springs that work within common alignment ranges for the Journey. Some aggressive drops increase negative camber significantly and may necessitate additional camber correction parts or adjustable control arms to avoid excessive tire wear.
Installation Considerations
Installation complexity varies by design. Some springs are direct replacements that use existing strut assemblies, while others require spring compressors, disassembly of the strut, or professional tools. Ease of installation affects cost and the time needed to complete the job.
Review whether the springs come with installation instructions and whether any special tools or safety equipment are necessary. If you plan DIY installation, ensure you understand steps for safely compressing springs and the alignment work that follows. For less experienced installers, professional installation minimizes risk and ensures proper suspension setup.
FAQ
How much lower will the Dodge Journey sit with lowering springs?
The actual drop depends on the specific springs chosen, but many lowering springs reduce ride height by about one to two inches. The final height can vary with load, sag, and manufacturing tolerances, so check the manufacturer’s stated drop and expect small deviations. After installation, measure ride height and account for settling over the first few hundred miles.
Do lowering springs affect ride comfort on the Journey?
Yes, lowering springs change ride comfort because they alter spring rates and suspension travel. Moderate drops with balanced spring rates can improve handling while keeping everyday comfort acceptable. Stiffer springs aimed at performance will usually make the ride firmer and transfer more road imperfections into the cabin.
Will installing lowering springs require additional parts or alignment?
Most installations require a wheel alignment afterward to correct camber and toe changes caused by the lower ride height. Depending on the drop and the Journey’s condition, you may also need extended bump stops, new top mounts, or camber correction components to preserve suspension geometry and prevent premature wear.
Are progressive lowering springs worth considering?
Progressive springs vary their rate through compression and can offer a blend of comfort and control, making them a reasonable option for owners who want a smoother daily ride with improved handling. Their benefits depend on vehicle weight and intended use, so choose specifications that match the Journey’s dynamics and your driving style.
Can I install lowering springs myself?
DIY installation is possible if you have the right tools and experience with spring compressors and strut disassembly. However, working on suspension components carries safety risks and requires precise reassembly and alignment. If you are unsure, professional installation ensures safe handling and proper suspension setup.
How We Chose the Best Dodge Journey Lowering Springs
We selected candidates by prioritizing attributes that directly affect real-world performance and daily usability on the Dodge Journey. Key evaluation criteria included target drop height and its effect on visual stance and wheel clearance, spring rate and how it influences ride firmness and body control, build quality and material treatments for corrosion resistance, and fitment accuracy for the Journey to avoid unexpected installation or alignment issues. We also considered whether the springs maintain adequate ride height under typical passenger and cargo loads and how they impact tire wear and suspension geometry. We excluded options lacking clear fitment data for the Dodge Journey, products without manufacturer specifications on drop height or spring rate, and any items that required extensive vehicle modification beyond common installation steps. The result is a focused list of seven lowering springs that meet practical standards for fit, durability, and predictable on-road behavior.
Our full evaluation process is outlined in our review methodology.
Conclusion
Lowering springs can sharpen handling and improve the visual stance of your Dodge Journey, but the right choice balances drop height, spring rate, and long-term durability. Prioritize fitment accuracy and a spring rate that matches how you drive to avoid unwanted tradeoffs between comfort and control. Remember that lowering often requires alignment and sometimes supplementary parts to preserve suspension geometry. Focus on predictable, well-documented specifications so the changes yield reliable performance improvements without creating new maintenance issues.
Explore More:
- Check out all Dodge Journey parts & accessories
- Explore Suspension & Steering
- Browse all Auto Parts
