Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want more ground clearance, a more commanding stance, or the ability to fit larger tires on your Dodge Journey, choosing the right lift kit matters. The wrong kit can harm ride quality, wheel alignment, and long-term suspension durability, while the right kit improves clearance and preserves handling.This guide presents seven shortlisted options that represent the top choices in this category. We evaluated each based on ride comfort, fitment accuracy, and long-term durability to help you decide which direction to take. Read on for the criteria and factors to consider before installation.
Looking for other parts? See all Dodge Journey parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | YGDMD Rubber Coil Spring Spacers — 8‑Piece Set (1" or 1.5" Lift) |  |
| Best Quality Built to a higher standard if you want something more solid | YoRise Car Rubber Coil Spring Spacers — 4‑Piece Booster Kit |  |
| Best Value The sweet spot between price and what you get | Stacool Rubber Coil Spring Spacers (8 PCS) Heavy-Duty Front Coil Spring Booster |  |
| Best Budget The cheapest option that still gets the job done reliably | Stacool 4‑Piece Rubber Coil Spring Spacers (Front) |  |
| Highest Rated A top-rated pick with lots of positive feedback | DEALPARTS 1.6 inch Leveling Lift Kit for Dodge Caliber (2006–2011) and Journey (2008–2015) |  |
| Most Popular A crowd favorite that many people choose with confidence | DEALPAREX Rear Strut Spacers 1.2-inch Lift Kit for Dodge Caliber/Journey/Avenger |  |
| Best Seller A high-volume bestseller chosen again and again | DEALPAREX 1.6-inch Rear Strut Spacers Lift Kit for Dodge Journey |  |
1. YGDMD Rubber Coil Spring Spacers — 8‑Piece Set (1" or 1.5" Lift)
| Included Components | 8x Coil Spring Spacer |
|---|---|
| Automotive Fit Type | Universal Fit |
| Material Type | Rubber |
| Maximum Lifting Height | 1.5 Inches |
These YGDMD rubber coil spring spacers are a simple aftermarket way to raise a Dodge Journey roughly 1.0 or 1.5 inches using stacked boosters inserted between the coils. Designed for universal fit, the set includes eight reinforced rubber pieces so you can install on front and rear springs; the thicker rubber construction aims to resist deformation and help dampen road noise and vibration. Typical use is a light lift to improve ground clearance, prevent bottoming when carrying heavier loads or larger tires, and slightly stiffen the rear stance. Installation requires jacking the vehicle and relieving spring tension to insert the spacers one at a time, so plan for basic mechanical work or a shop install. Results in user reports vary: many owners see a noticeable ride height gain and improved clearance, while some find fitment difficult and others reported short lifespan when under heavy use. These spacers are a budget-friendly, low-complexity solution for modest lift needs but are not a substitute for a full suspension kit for heavy-duty offroad use or long-term load carrying.
Best for: Balanced all‑round buyers who want an affordable, low‑complexity way to lift a Dodge Journey for modest clearance, occasional heavier loads, or mounting slightly larger tires without changing springs.
Less Ideal for: Drivers planning heavy offroad use, sustained heavy towing, or those who want a permanent suspension solution should choose a dedicated lift or upgraded springs instead.
- Provides selectable 1.0 or 1.5 inch lift to increase ground clearance
- Thick reinforced rubber helps reduce suspension noise and resists deformation
- Eight-piece kit covers front and rear springs for a balanced lift
- Universal fit approach simplifies pairing with common coil spring setups
- Relatively simple installable with basic jack and hand tools
- Fitment can be tight or difficult on some vehicles and may require heating or prying to seat
- Not intended as a long-term replacement for worn springs or heavy-duty suspension upgrades
Verdict: A cheap, easy-to-install rubber spacer kit that gives a Dodge Journey a modest 1.0–1.5 inch lift and quieter ride for light-duty clearance needs.
2. YoRise Car Rubber Coil Spring Spacers — 4‑Piece Booster Kit
| Material | Rubber |
|---|---|
| Quantity | 4 pieces |
| Estimated lift | 2.5 inches per spacer |
| Manufacturer | YoRise |
The YoRise rubber coil spring spacers are simple, low‑cost boosters that slip between the coils to raise ride height and add preload to the spring. Supplied as a set of four, the molded rubber rings are intended to restore lost spring tension, reduce vibration and road noise, and protect the suspension from further collapse. Installation is straightforward for someone familiar with coil spring work: pry or compress the spring to create gap and tap the spacer into place between coils. Because they are rubber they offer a degree of damping compared with hard plastic or metal spacers, which helps reduce harshness when lifting small amounts. Expect a modest 2.5 inch effective lift per spacer when used as directed, but know this is a lift booster rather than a full suspension kit. They will not replace worn springs or correct major sagging and may change ride characteristics and alignment enough that a post‑installation inspection is advisable. For a performance‑oriented Dodge Journey setup these can be a quick way to gain slight lift without new springs, but they are best used as a temporary or mild‑lift solution rather than a complete suspension upgrade.
Best for: Performance‑oriented owners who want a quick, low‑cost way to gain a small amount of lift and firmer spring preload on their Dodge Journey without replacing the entire suspension.
Less Ideal for: Drivers seeking a full suspension upgrade, significant lift, or track‑level handling improvements should choose purpose‑built springs, shocks, or a full lift kit instead.
- Provides roughly 2.5 inches of lift per spacer to recover ride height and increase ground clearance for mild off‑road or load carrying needs
- Rubber construction adds damping to reduce vibration and road noise compared with rigid spacers
- Includes four pieces so front and rear installation is possible without buying extra parts
- Not a replacement for worn or performance springs and cannot correct severe sag or handling issues
- Installation may require a spring compressor or disassembly of suspension on some vehicles
- Lift is modest and may alter alignment or ride feel requiring inspection and possible adjustments
Verdict: A compact rubber spacer kit that delivers a simple, noise‑reducing 2.5 inch boost to restore ride height and improve comfort for mild lift needs on the Dodge Journey.
3. Stacool Rubber Coil Spring Spacers (8 PCS) Heavy-Duty Front Coil Spring Booster
| Material Type | Rubber |
|---|---|
| Automotive Fit Type | Universal Fit |
| Included Components | 4 or 8 Coil Spring Spacers |
| Maximum Lifting Height | 1.5 Inches |
These rubber coil spring spacers slip between the front coil spring coils to add preload and restore ride height on vehicles with weak or sagging springs. They are typically used when a low-cost lift or temporary support is needed without replacing springs or struts. Made from heavy-duty rubber, the boosters are intended to damp vibration and reduce noise while providing two selectable lift increments roughly 1 inch or 1.5 inches depending on placement. Installation requires jacking the vehicle and creating space in the coils with a compressor or spring tool, then seating the spacers between coils in the pattern the manufacturer describes. The product offers a simple, reversible way to correct slight front sag or gain extra clearance for light loads and mild off-road use, but it is not a suspension replacement and will not match the durability or control of a proper spring or lift kit. Fit and effectiveness depend on coil spacing and geometry, so measure and verify fitment on the Dodge Journey before installing and recheck the seating after the first 100 miles.
Best for: Practical optimizers who want an inexpensive, reversible way to correct front sag or gain a small amount of clearance on a Dodge Journey without replacing the entire suspension.
Less Ideal for: Drivers seeking a permanent lift, substantial payload handling improvement, or improved handling should choose a proper spring or professional lift kit instead of these spacers.
- Provides a low-cost way to add about 1 to 1.5 inches of front lift without replacing springs
- Rubber construction helps reduce vibration and road noise compared with hard spacers
- Comes as a multi-piece kit (4 or 8 pieces) so you can tune height by placement
- Simple reversible installation that can be done with basic garage tools and a spring compressor
- Not a long-term replacement for worn springs and does not restore original suspension control
- Effectiveness depends on coil spacing and may not fit every vehicle without measurement
Verdict: A budget-friendly, reversible way to regain front ride height or add a small lift on a Dodge Journey without replacing springs.
4. Stacool 4‑Piece Rubber Coil Spring Spacers (Front)
| Included Components | 4 x Coil Spring Spacer |
|---|---|
| Material Type | Rubber |
| Automotive Fit Type | Universal Fit |
| Maximum Lifting Height | 1.5 Inches |
These rubber coil spring spacers are a low‑cost way to restore front ride height and add a small lift when a vehicle’s coil springs have weakened. The kit includes four rubber boosters that insert between spring coils to give two effective elevation options — roughly 1.0 inch or 1.5 inches — and the rubber material helps reduce vibration and road noise. Installation is simple for a mechanically capable DIYer but typically requires a jack and enough clearance between coils or a spring compressor to seat the spacer safely. Because they are made of dense rubber they compress slightly under load, so results are best for mild sag correction or occasional light towing rather than heavy off‑road use. They are marketed for front coil springs only and will not replace worn springs for long‑term heavy loads. For a Budget‑conscious Dodge Journey owner wanting a modest front lift or to correct a sagging front end, these deliver a straightforward, inexpensive fix; drivers needing more lift, durable long‑term support, or precise ride control should consider a full spring or suspension kit instead.
Best for: Budget‑conscious owners seeking an inexpensive, temporary way to correct sagging front ride height or gain a small amount of clearance on a Dodge Journey while prioritizing cost savings over long‑term suspension overhaul.
Less Ideal for: Drivers who need substantial, permanent lift, consistent heavy‑load support, or precise ride tuning should avoid this and choose full replacement springs or a dedicated suspension lift kit instead.
- Provides a measurable 1.0 in or 1.5 in front lift option for quick sag correction
- Heavy‑duty rubber construction offers vibration and noise dampening
- Simple insert‑style installation suitable for DIY with basic tools
- Pack of four covers both front springs on most vehicles
- Not a long‑term replacement for worn coil springs under heavy or constant loads
- Rubber compresses over time so lift height can settle
- Designed for front springs only and not suitable for rear lift applications
Verdict: An inexpensive, easy DIY fix to add about 1 to 1.5 inches of front lift and reduce vibration for sagging Dodge Journey front springs.
5. DEALPARTS 1.6 inch Leveling Lift Kit for Dodge Caliber (2006–2011) and Journey (2008–2015)
| Automotive Fit Type | Vehicle Specific Fit |
|---|---|
| Material Type | Polyurethane (PU) |
| Auto Part Position | Front, Rear |
| Maximum Lifting Height | 1.6 Inches |
This DEALPARTS leveling lift kit uses polyurethane front and rear strut spacers to raise a Dodge Journey or Caliber by up to 1.6 inches. It installs as a spacer on the coil/strut assembly and is intended to increase ground clearance and provide room for larger rims and tires without changing springs or shocks. The kit includes two front and two rear spacers plus a fitting kit, and the high-density polyurethane construction is marketed for durability and resistance to road wear. In real-world use the spacer approach is simple and fast to fit compared with full spring replacements and keeps the factory ride characteristics largely intact. Limitations are that the modest 1.6-inch lift is mainly for clearance and style rather than heavy off-road articulation, and using spacers does not change suspension travel or load capacity the way a full lift or upgraded springs would. Buyers should plan for proper alignment after installation and inspect fitment hardware periodically.
Best for: Reliability-focused owners who want a straightforward, low-maintenance way to raise a Dodge Journey or Caliber a small amount for better clearance and to fit larger wheels while keeping the factory suspension behavior.
Less Ideal for: Drivers seeking a substantial off-road lift, increased suspension travel, or higher load capacity should consider full spring and shock upgrades instead.
- Vehicle-specific fit for Dodge Caliber (2006–2011) and Journey (2008–2015)
- Polyurethane construction designed for long service life and resistance to wear
- Includes front and rear spacers plus a fitting kit for easier installation
- Raises vehicle clearance by up to 1.6 inches to allow larger wheels and improved approach clearance
- Lift is modest and intended for clearance and appearance rather than serious off-road capability
- Spacer solution does not increase suspension travel or improve load carrying compared with spring or shock upgrades
Verdict: A simple, vehicle-specific polyurethane spacer kit to reliably add 1.6 inches of clearance to Dodge Journey and Caliber models with minimal modification.
6. DEALPAREX Rear Strut Spacers 1.2-inch Lift Kit for Dodge Caliber/Journey/Avenger
| Maximum Lifting Height | 1.2 Inches |
|---|---|
| Material Type | Polyurethane (PU) |
| Auto Part Position | Rear |
| Included Components | fitting kit |
This rear strut spacer kit provides a simple way to gain about 1.2 inches of lift on compatible Dodge models by replacing the top of the rear strut with two polyurethane spacers and using the included fitting kit. Installation is straightforward for someone comfortable with basic suspension work and a jack because the kit is vehicle-specific and ships with the hardware needed to mount the spacers. The polyurethane material is described as high-density for durability and resistance to road conditions, so the spacers should be a long-lived option for occasional off-road or rough-road driving and for fitting slightly larger wheels and tires. Limitations include the modest lift height, which is intended for light clearance gains rather than heavy-duty off-road use, and its rear-only application so a level or full-lift setup requires additional parts. Buyers should also expect professional alignment after installation to maintain handling and tire wear.
Best for: Convenience-driven owners who want a quick, low-effort way to add a small amount of rear lift and improve clearance for slightly larger tires without a full suspension overhaul.
Less Ideal for: Drivers seeking substantial lift, heavy off-road capability, or a complete suspension upgrade should consider multi-component or heavier-duty kits instead.
- Vehicle-specific fit simplifies installation on the listed Dodge models
- Compact rear-only design lets you gain clearance without replacing full suspension
- High-density polyurethane construction aimed at corrosion resistance and durability
- Includes fitting kit and hardware for a do-it-yourself install
- Provides only a modest 1.2 inch lift, not suitable for serious off-road modification
- Rear-only lift may require complementary front components for a level stance
Verdict: An easy, vehicle-specific rear strut spacer kit that adds about 1.2 inches of durable polyurethane lift to improve clearance with minimal installation effort.
7. DEALPAREX 1.6-inch Rear Strut Spacers Lift Kit for Dodge Journey
| Compatible vehicle | Dodge Journey |
|---|---|
| Lift height | 1.6 inch (40 mm) |
| Position | Rear |
| Material | Polyurethane (PU) |
This DEALPAREX lift kit provides two 1.6-inch rear strut spacers plus a fitting kit to increase ground clearance on the Dodge Journey. The spacers are molded from high-density polyurethane, which the manufacturer says resists wear and keeps the spacer shape under load. Installation is intended to be a simple bolt-on job using the included fitting hardware and is typically done by replacing or lifting the rear strut tops to accept the spacer. The practical benefits are modest but clear: a small, factory-friendly lift that helps fit slightly larger tires, reduces scraping on low obstacles, and gives a more commanding stance without replacing springs or shocks. Limitations are that this is a rear-only spacer set so it does not change front ride height or suspension geometry, and a 1.6-inch gain is modest compared with full suspension lifts. Also, polyurethane spacers can transfer a bit more road harshness than progressive spring changes, and proper installation requires basic suspension tools and safe lifting procedures.
Best for: Risk-averse shoppers who want a conservative, reversible way to add a little clearance to their Dodge Journey without replacing major suspension components.
Less Ideal for: Drivers seeking large lifts, comprehensive suspension performance upgrades, or a perfectly smooth ride after lifting should consider full suspension kits instead.
- Made from high-density polyurethane for durability and shape retention
- Includes fitting kit to simplify installation
- Raises rear ground clearance to help fit slightly larger tires and reduce scraping
- Compact bolt-on solution that avoids replacing springs or shocks
- Rear-only spacers do not address front ride height or overall suspension balance
- Provides only a modest 1.6-inch lift compared with full suspension kits
- May increase transmitted road harshness compared with spring-based lift solutions
Verdict: A simple, rear-only 1.6-inch polyurethane spacer kit for Dodge Journey owners who want a small, reversible increase in ground clearance without changing major suspension parts.
Choosing the Right Dodge Journey Lift Kit: Key Factors to Consider
Lift Height and Intended Use
Choosing the right lift height is about balancing clearance with handling and drivability. A modest lift preserves alignment angles and minimizes changes to steering feel, while a larger lift delivers more off-road clearance but often requires additional suspension and driveline modifications.
Think about the terrain you will encounter and whether you plan to fit larger tires. For occasional dirt roads, a small to moderate lift is usually sufficient. If you expect sustained off-road use with obstacles, prioritize a kit that provides greater travel and accounts for suspension geometry changes.
Suspension Geometry and Handling
A quality lift kit maintains or properly corrects suspension geometry to avoid adverse effects on steering, camber, and toe. Poorly designed kits can increase stress on ball joints, control arms, and CV joints, leading to accelerated wear and unpredictable handling.
Look for kits that include components or alignment corrections to preserve factory suspension dynamics. Consider whether the kit requires additional alignment parts or a professional alignment after installation to ensure predictable road behavior.
Compatibility and Fitment Documentation
Accurate fitment information ensures the parts match the Dodge Journey model year and trim. Kits with clear vehicle fitment guides, part numbers, and mounting diagrams reduce the risk of returns or modification during installation.
Verify that the kit lists compatible years and notes any model-specific caveats, such as trim-dependent components or required accessory relocation. Kits lacking detailed fitment documentation may lead to extra work or unexpected incompatibilities.
Material Quality and Corrosion Resistance
Durable materials and protective finishes matter because suspension components see heavy loads, road debris, and exposure to the elements. High-strength steel, quality welding, and corrosion-resistant coatings extend service life and reduce maintenance needs.
Assess whether fasteners are grade-rated and if bushings or bearings are high-quality. Kits with replaceable wear parts and readily available hardware help keep your Dodge Journey on the road longer with fewer surprises.
Installation Complexity and Required Modifications
Installation difficulty affects whether you can do the work yourself or need professional help. Some kits are bolt-on and relatively straightforward, while others require control arm relocation, brake line extensions, or minor trimming.
Factor in your mechanical skill level, available tools, and access to alignment services. Also consider whether the kit includes all necessary hardware, instructions, and any extra brackets or mounts to avoid multiple trips for missing parts.
Ride Quality and Long-Term Durability
A lift should improve capability without making daily driving uncomfortable. How a kit affects ride quality depends on spring rates, shock compatibility, and overall system tuning. Some kits preserve a smooth on-road ride, while others can make the suspension stiffer or more bouncy.
Think about the balance you want between weekend off-road performance and weekday comfort. Durable components, serviceable parts, and good shock compatibility help maintain consistent ride characteristics over time.
How We Chose the Best Dodge Journey Lift Kit
We focused on lift kits that provide reliable fitment for the Dodge Journey and deliver meaningful clearance gains without compromising basic handling. Our primary evaluation criteria included lift height accuracy, suspension geometry preservation, and the quality of mounting hardware. We also considered materials and corrosion resistance, availability of replacement components, and the level of installation difficulty.Kits were excluded if they required major cutting or permanent frame modifications, if they lacked clear fitment documentation for the Dodge Journey, or if they were designed only for extreme race or competition use. We prioritized solutions that maintain factory suspension function, support common tire upgrades, and have clear instructions or documented installation processes. The result is a curated set of seven kits that balance practicality, durability, and expected on-road behavior.
Our full evaluation process is outlined in our review methodology.
FAQ
How much lift can I safely add to a Dodge Journey?
How much lift is safe depends on the specific kit and your vehicle's condition. Moderate lifts often preserve factory geometry, while large lifts may require added components and reengineering. Consult fitment documentation and consider professional advice to avoid overloading suspension parts.
Will a lift kit affect my Dodge Journey's alignment and tire wear?
Yes, changing ride height alters suspension angles, which can affect alignment and tire wear. Most installations require a thorough alignment afterwards, and some kits include or recommend correction components to minimize premature tire wear.
Can I install a lift kit myself or should I hire a professional?
Some kits are designed for competent DIYers and include clear instructions and necessary hardware. More involved kits that require control arm changes, brake line extensions, or precise torque sequences are better handled by a professional to ensure safety and correct geometry.
Do I need different shocks after lifting my Journey?
Often a lift changes the required shock length and damping characteristics. Using shocks designed for the new ride height helps preserve ride quality and suspension travel. Check kit recommendations to determine whether new or revalved shocks are necessary.
Will a lift kit allow me to fit larger tires on my Journey?
A lift kit can create the clearance needed for larger tires, but fitting bigger tires also depends on wheel offset, fender clearance, and suspension travel. Plan for possible trimming or minor adjustments and verify that tires will not rub during full articulation.
Conclusion
Prioritize fitment accuracy, suspension geometry preservation, and installation complexity when choosing a lift kit for your Dodge Journey. Smaller lifts usually offer a better balance of everyday comfort and modest off-road capability, while larger lifts demand additional components and careful setup.Decide which tradeoffs you can accept between ride quality and clearance, verify documentation for your model year, and plan for alignment and possible shock upgrades. Focusing on these factors will help you choose a solution that matches your driving needs and long-term durability expectations.
Explore More:
- Check out all Dodge Journey parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
