Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Replacing or adding a console cover can noticeably improve comfort and preserve the look of your vehicle interior. For Dodge Journey owners, the right console cover provides better arm support, protects the factory surface from wear, and can simplify cleaning.This guide spotlights seven shortlisted options that represent the top choices in this category. We evaluated each pick on fit, material quality, and ease of installation to help you find a cover that matches how you use your vehicle. Read on for practical guidance before the product list.
Looking for other parts? See all Dodge Journey parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | INTGET Center Console Cover for 2011–2020 Dodge Journey |  |
| Best Quality Built to a higher standard if you want something more solid | INTGET Center Console Cover for 2011–2020 Dodge Journey |  |
| Best Value The sweet spot between price and what you get | YOSRTER Center Console Armrest Cover for Dodge Journey (2011–2020) with White Trim |  |
| Best budget The cheapest option that still gets the job done reliably | Figpade Car Center Console Armrest Cover with Quilted Diamond Design and Side Pockets |  |
| Highest Rated A top-rated pick with lots of positive feedback | YOSRTER Center Console Armrest Cover for Dodge Journey (Carbon Fiber Red) |  |
| Most Popular A crowd favorite that many people choose with confidence | ESKONKE Nappa Leather Center Console Armrest Cover with Dual Storage Pockets |  |
| Best Seller A high-volume bestseller chosen again and again | Stacool Microfiber Leather Car Center Console Armrest Cover with Side Storage |  |
1. INTGET Center Console Cover for 2011–2020 Dodge Journey
| Compatible years | 2011-2020 Dodge Journey |
|---|---|
| Material | PU Leather |
| Fit type | Vehicle-specific fit |
This INTGET console cover slips over the Dodge Journey center armrest to conceal damage and protect the lid from sun, sweat, scratches and pet paws. It is made from PU leather with a padded feel so it softens contact and helps prevent the armrest from getting hot in direct sun. Installation is a simple stretch-and-hook process that aligns to the factory curvature; a snug fit means the cover stays put but may require careful stretching to avoid small ripples during setup. The cover is water resistant and easy to wipe clean, making it a practical choice for daily drivers, families and pet owners who want to extend the life of an aging lid without recovering it. It does not change how the console opens, but because it is an aftermarket cover it will not be a permanent structural repair and the surface may wear differently over many years compared with factory upholstery.
Best for: Buyers seeking a balanced, practical upgrade that protects and refreshes their Journey’s center armrest without expensive upholstery work.
Less Ideal for: Drivers who want a permanent factory-quality reupholstery solution or an exact material match to original factory trim should consider professional recovery instead.
- Made to fit 2011–2020 Dodge Journey console shape for a near-factory look
- PU leather surface is waterproof and easy to clean
- Padded feel improves comfort and reduces heat transfer from sun exposure
- Snug fit resists sliding once properly installed
- Not a permanent repair so underlying damage remains covered rather than restored
- Installation can be tight and may require careful stretching to avoid wrinkles
Verdict: A cost-effective, vehicle-specific PU-leather cover that protects and refreshes the Dodge Journey armrest with a near-factory fit, ideal for everyday use but not a permanent upholstery repair.
2. INTGET Center Console Cover for 2011–2020 Dodge Journey
| Brand | INTGET |
|---|---|
| Model | Car Center Console Cover |
| Fitment | Dodge Journey 2011-2020 |
| Material | Microfiber Leather |
This INTGET center console cover replaces a worn or sun-damaged armrest lid with a fitted microfiber leather protector designed for the 2011–2020 Dodge Journey. It slips over the console lid and secures with hooks and straps so the cover stays flat and maintains the original curvature, protecting the surface from sweat, scratches, pet paws and sun heat while adding light padding for comfort. The material is waterproof and easy to wipe clean, and the product ships as a single-piece cover tailored to trim levels listed by the manufacturer. Installation is straightforward though it can require a bit of stretching and corner adjustment to avoid ripples; letting the cover warm in sun helps it conform. Buyers seeking a factory-like look will appreciate the stitched finish and snug fit, while those who want a permanent structural repair should note this is a protective cover rather than a replacement lid.
Best for: Performance-oriented buyers who prioritize a high-quality, vehicle-specific interior upgrade and want a durable, comfortable cover that preserves the stock look.
Less Ideal for: Owners looking for a structural or permanent lid replacement or those who prefer to repair underlying damaged foam or trim instead of covering it.
- Tailored fit for Dodge Journey 2011–2020 for a near-factory appearance
- Microfiber leather is waterproof and easy to clean
- Full surface coverage protects against sun, sweat, scratches and pet damage
- Adds cushioning for improved arm comfort
- Requires careful stretching and corner alignment during install to avoid ripples
Verdict: A well-fitted, waterproof microfiber leather cover that restores and protects the Dodge Journey armrest while improving comfort.
3. YOSRTER Center Console Armrest Cover for Dodge Journey (2011–2020) with White Trim
| Fitment | Dodge Journey 2011-2020 |
|---|---|
| Material | Microfiber leather |
| Function | Waterproof and scratch-resistant cover |
This YOSRTER armrest cover slips over the Dodge Journey center console to protect the factory armrest from scratches, sweat, and general wear while adding a cleaner leather-like surface and white trim accent. Installation is simple: the elasticized edge stretches over the armrest box and tucks into place for a snug fit without tools. The microfiber leather surface is waterproof and easy to wipe clean, which makes it practical for daily drivers who want a neater cabin without replacing the whole console. It is lightweight and unobtrusive, so it will not interfere with normal armrest use or access to the storage box. The main limitation is that it is a cover rather than a structural replacement, so it will not repair damaged padding or change the armrest shape permanently. Also the elastic fit requires stretching during installation which can be tight on first application but helps keep it from shifting in use.
Best for: Practical buyers who want an affordable, no-fuss way to protect and freshen a Dodge Journey interior without replacing parts or doing custom work.
Less Ideal for: Drivers looking to repair a damaged armrest, change its shape, or achieve a permanent OEM-quality replacement should consider a full replacement or professional upholstery instead.
- Made from microfiber leather that is smooth, waterproof, and easy to clean
- Elastic edge provides a snug, tool-free install that stays in place
- Designed specifically to fit Dodge Journey center consoles from 2011 to 2020
- Adds a refreshed, finished look with white trim without replacing the armrest
- Does not restore damaged padding or change underlying armrest shape
- Requires significant stretching to fit initially which can be tight
Verdict: A low-cost, easy-to-install cover that protects and improves the look of a Dodge Journey armrest without replacing the part.
4. Figpade Car Center Console Armrest Cover with Quilted Diamond Design and Side Pockets
| Material | Leather (faux-leather) |
|---|---|
| Folded size | 12.00 x 7.40 inch |
| Unfolded size | 16.53 x 12.00 inch |
| Side pockets size | 9.05 x 4.92 inch |
This Figpade console cover is a budget-oriented way to protect and dress up the Dodge Journey's center armrest. It slips over the factory armrest and secures with stretchable elastic bands and non-slip backing so it stays put during daily use. The quilted, padded surface gives a softer resting spot for your elbow and the leather-like surface wipes clean with a damp cloth. Two slim side pockets add reachable storage for items such as a phone, keys or cards, which helps reduce clutter in the Journey cabin. Rhinestone accents provide a decorative, bling-style look that will appeal to owners who want a flashier interior on a small budget. Limitations include the one-size orientation meant for narrower consoles and the possibility of interfering with armrest functions that open or slide; confirm the Journey's armrest type and dimensions before fitting. Expect an affordable, easy-to-install cosmetic and protective upgrade rather than a precision-matched factory replacement.
Best for: Budget-conscious owners wanting a low-cost way to protect and soften their Dodge Journey armrest while adding quick-access pockets and a more decorative interior.
Less Ideal for: Drivers seeking a custom-fit, factory-quality replacement or those who prefer a completely understated OEM look should consider higher-end or vehicle-specific options.
- Padded quilted top adds noticeable arm comfort during drives
- Elastic bands and non-slip backing make installation quick and keep the cover in place
- Integrated side pockets provide convenient storage for small items
- Easy to clean faux-leather surface that resists light spills and dirt
- Designed for smaller or narrower consoles so may not fit wider Journey armrests perfectly
- Decorative rhinestones may not suit drivers who prefer a subtle, factory look
Verdict: An inexpensive, easy-install cover that adds padding, pockets and sparkle to a Dodge Journey armrest but is best for narrower consoles rather than a precise factory-style replacement.
5. YOSRTER Center Console Armrest Cover for Dodge Journey (Carbon Fiber Red)
| Fitment | Dodge Journey 2011-2020 |
|---|---|
| Material | Microfiber leather |
| Installation | Elastic rubber band slip-on |
This YOSRTER armrest cover slips over the Dodge Journey center console to protect the factory armrest from scratches, sweat, and daily wear while giving the interior a refreshed look. Made from microfiber leather, the surface is smooth, water resistant, and easy to wipe clean, and an elastic rubber edging stretches around the armrest box for a snug, low-profile fit. Installation is straightforward: stretch the band under the armrest and pull the cover over the box, which users report fits tightly once in place. The cover improves comfort for the elbow and helps keep the armrest interior clean. Expect a simple, affordable way to hide scuffs and restore the cabin appearance, though the cover is an add-on surface rather than a structural replacement and will eventually show wear if exposed to heavy abrasion. If you prefer a permanently upholstered solution or need insulated padding, this slip-on cover is not a direct substitute.
Best for: Reliability-minded Dodge Journey owners who want a low-cost, maintenance-focused way to protect and tidy the factory armrest without permanent modification.
Less Ideal for: Buyers seeking a permanent reupholstery, added cushioning, or thermal insulation should consider professional upholstery or a replacement armrest rather than a slip-on cover.
- Designed specifically to fit Dodge Journey center console armrests from 2011–2020 for a snug appearance
- Microfiber leather surface is smooth, water resistant, and easy to clean
- Elastic rubber edge provides a secure, low-profile fit once installed
- Helps protect the armrest from scratches, sweat, and everyday wear while improving cabin appearance
- Slip-on design does not replace underlying padding or structural components
- May show abrasion over time under heavy use and is not fully protective against deep cuts
Verdict: A simple, fitted microfiber leather cover that reliably protects and refreshes the Dodge Journey armrest without permanent changes.
6. ESKONKE Nappa Leather Center Console Armrest Cover with Dual Storage Pockets
| Included Components | Car Center Console Cover with 2 Storage Bags |
|---|---|
| Material Finish | Glossy Nappa leather |
| Size | 11.8 * 7.87 inch |
| Manufacturer | ESKONKE |
This armrest cover is designed to sit over a vehicle center console to protect the factory surface from scratches, spills, pet claws, and everyday wear while adding two storage pockets for phones, pens, and tissues. It fastens with two elastic straps for tool-free installation and uses a diamond-quilted Nappa leather surface intended to resist scratches, water, and staining while improving airflow against the elbow. In use the pockets are handy for keeping small items within reach and the low-profile padding reduces pressure points when resting an arm. The main limitations are fit and coverage: the listed size (11.8 × 7.87 inches) is compact and several buyers report it is shorter than some consoles, so it may not cover the full length of wider or longer armrests found in some Dodge Journey model years. Padding is moderate, so drivers wanting a plush cushion may need additional foam underneath. For owners of a Dodge Journey with a center console close to the cover dimensions, this is an affordable, easy-to-install protector that improves tidiness and defends the factory console surface.
Best for: Convenience-driven buyers who want a quick, tool-free way to protect and tidy their Dodge Journey interior while adding small-item storage and modest comfort improvements.
Less Ideal for: Owners seeking a full-length, heavily padded replacement armrest or those whose Dodge Journey console exceeds the cover dimensions should consider larger or purpose-built padded replacements instead.
- Nappa leather surface resists stains, scratches, and is easy to wipe clean.
- Built-in dual side pockets increase accessible storage for small items.
- Diamond-quilted pattern disperses pressure and improves airflow for comfort.
- Simple elastic-strap installation requires no tools and stays snug once fitted.
- Compact listed size may not fully cover longer or wider consoles.
- Padding is relatively thin compared with dedicated cushioned armrests.
Verdict: A convenient, easy-to-install Nappa leather cover that protects your Dodge Journey center console and adds handy storage pockets.
7. Stacool Microfiber Leather Car Center Console Armrest Cover with Side Storage
| Material | Microfiber Leather |
|---|---|
| Special Feature | Adjustable |
| Position | Inside |
| Number of Items | 1 |
This Stacool center console armrest cover slips over a vehicle's console lid to add padding, protect the surface, and provide two small side storage pockets. It installs without tools using an elastic strap and a textured backing that helps prevent slipping, and the memory foam core restores its shape after use. The diamond-stitched microfiber leather present a cleaner, upgraded look compared with a worn factory lid, and the built-in pockets are handy for slim items like cards, receipts, or a slim phone. Buyers should measure their console before purchase because the product is sized for smaller consoles and will not close or fit on larger or unusually shaped lids. Some users report the side pockets are shallow and less secure for bulky phones. For a Dodge Journey, this cover can improve comfort and conceal wear when the Journey's console lid dimensions match the listed size, but it is not a custom, vehicle-specific replacement and may not fit every Journey trim or year without verification.
Best for: Practical, risk-averse buyers who want an affordable, low-effort way to hide wear and add comfort to their console while keeping changes non-permanent.
Less Ideal for: Shoppers seeking an exact factory-quality replacement or a guaranteed fit across all Dodge Journey model years should look for a vehicle-specific cover or measure carefully before buying.
- Soft, skin-friendly microfiber leather surface that upgrades interior appearance
- Thick memory-foam padding improves arm comfort on long drives
- Adjustable elastic strap and anti-slip backing for a snug, non-shifting fit
- Integrated left and right side pockets add small-item storage without modifying the console
- Sized for smaller, rectangular consoles so it may not close or fit on larger or irregular lids
- Side pockets are shallow and can be unstable for bulky or encased phones
Verdict: A budget-friendly, padded console cover that improves comfort and hides wear on smaller console lids but requires careful measuring for a proper Dodge Journey fit.
Choosing the Right Dodge Journey Console Cover: Key Factors to Consider
Fit and Compatibility
A precise fit matters because a loose cover can shift, bunch, or interfere with storage compartments. Look for covers designed to contour to the specific shape of the Dodge Journey console or those with adjustable fastenings to secure edges and prevent movement.
Correct compatibility also ensures that lid operation, cup holders, and any integrated features remain usable. Poor fit increases abrasion in certain spots and reduces the lifespan of both the cover and the original console surface.
Material and Durability
Material choice affects how the cover stands up to daily use, exposure to sunlight, and spills. Durable textiles, heavy-duty vinyl, or quality synthetic leathers typically resist abrasion and tearing better than flimsy fabrics.
Consider materials rated for UV resistance and reduced color fading if the vehicle spends a lot of time in sunlight. Reinforced stitching and edge binding also extend service life and prevent fraying where the cover contacts the console edges.
Comfort and Padding
Padding level influences long-term comfort when resting your arm on the console during drives. Thicker foam or gel layers provide softer support and reduce pressure on the elbow, while thinner pads prioritize a low-profile look.
Balance comfort needs with how the cover affects reach to controls and storage access. High-density padding holds shape longer, while low-density foam may compress over time and lose ergonomic benefit.
Ease of Installation and Removal
Simple installation saves time and reduces the risk of improper fit. Look for covers that attach with straps, elastic edges, or built-in fasteners that secure under the console without tools. Removable designs make cleaning and seasonal swaps straightforward.
Avoid covers that require permanent adhesives or disassembly of the console, as those complicate upkeep and may void any factory protections.
Water and Stain Resistance
Waterproof or water-resistant surfaces help protect the console from spills and moisture, which is especially important in family or utility vehicles. Materials with a water-resistant coating or tightly woven construction prevent liquids from soaking through to the original surface.
Also consider how easily the material wipes clean and whether stains can be lifted with mild cleaners. Breathable liners can reduce trapped moisture while still offering surface protection.
Aesthetic and Color Match
A cover should complement the interior color and texture rather than clash with it. Neutral tones and subtle textures tend to integrate better with existing trim. Choose a style that matches your priorities, whether that is a factory-like look or a more protective, utilitarian finish.
Well-matched covers preserve resale appeal and help the interior feel cohesive, while bold contrasts may suit personal style but draw more attention to the modification.
How We Chose the Best Dodge Journey Console Cover
We focused on options that deliver reliable fit and durable protection specifically for the Dodge Journey console area. Key evaluation criteria included material type and abrasion resistance, how accurately the cover conforms to the Journey console shape, installation method and stability during everyday use, and how well the surface resists stains and is cleaned. We also considered padding and ergonomics for arm comfort, seam and stitching quality, and compatibility with any factory features like storage lids and cup holders.Exclusions: we did not include covers that required major console modification, items incompatible with the Journey console layout, or products with poor construction or unclear sizing. The resulting list highlights well-fitting, easy-to-install covers that balance comfort, protection, and longevity.
Our full evaluation process is outlined in our review methodology.
FAQ
Will a console cover interfere with the Dodge Journey storage compartments?
Not usually. Most console covers are designed to fit over the lid and sides without blocking access. Choose a cover that specifically indicates compatibility with the Dodge Journey console shape and one that uses nonpermanent fastenings to keep lids and compartments usable.
How do I clean a console armrest protector?
Cleaning depends on the material. Most synthetic leathers and vinyl wipe clean with a damp cloth and mild soap. Fabric covers often tolerate spot cleaning and may be removable for hand washing. Always follow care instructions to avoid shrinking or damaging the material.
Are waterproof console covers necessary?
Waterproof covers are useful if you expect frequent spills, wet gear, or damp clothing. They offer an extra layer of protection against stains and moisture. If moisture exposure is minimal, a water-resistant fabric may provide sufficient protection while offering more breathability.
Can I install a console protector myself?
Yes, most console covers are designed for straightforward, tool-free installation. Common systems use elastic edges, straps, or clips that secure beneath the console. Follow the included instructions and confirm the cover does not obstruct any moving parts.
How long should a good console cover last?
Lifespan depends on material quality and usage. Higher-quality covers with reinforced stitching and robust materials can last several years under normal use, while thin fabrics may show wear sooner. Regular cleaning and avoiding sharp objects will extend service life.
Conclusion
When choosing a Dodge Journey console cover, prioritize fit and material durability to protect the factory surface and maintain daily comfort. Think about padding level, installation method, and how the cover handles spills to match your driving habits.Accept tradeoffs between low-profile styling and thicker padded comfort, and select a cover that secures well without obstructing storage or controls. Focusing on these criteria will help you find a durable, practical console protector that meets your needs.
Explore More:
- Check out all Dodge Journey parts & accessories
- Explore Interior Accessories
- Browse all Accessories
