Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading your Mitsubishi Lancer 6×8 speakers can transform in-car audio from thin and muddy to clear and balanced. The right 6×8 speakers improve vocal clarity, tighten bass response, and reduce distortion at higher volumes, which matters if you drive a Lancer regularly and want consistent performance on the road. This guide highlights a short list of top picks specifically suited to the Lancer, chosen for fit, power handling, and sound quality. Below you will find the shortlisted products and why they made the cut, plus the key factors we evaluated to help you choose the best option for your driving habits and installation constraints.
Looking for other parts? See all Mitsubishi Lancer parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Kenwood KFC-C6866S 6×8 2-Way Car Speakers (Pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | JBL Club 8620 5×7/6×8 2-Way Coaxial Car Speaker Pair |  |
| Best Quality Built to a higher standard if you want something more solid | KICKER 43DSC6804 6×8" DS Series Coaxial Speakers with Harness (4-pack) |  |
| Best Budget The cheapest option that still gets the job done reliably | Hifonics ZS5768CX 5×7/6×8 Coaxial Car Speakers (Pair) |  |
| Most Sold A high-volume bestseller chosen again and again | Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs) |  |
| Best Value for Money The sweet spot between price and what you get | Kicker KS-Series 6×8 Coaxial Car Speakers (Pair) |  |
| Best Overall The best all-around choice for most situations | ORION Cobalt CM6854 5×7/6×8 Midrange Bullet Loudspeakers (Pair) |  |
1. Kenwood KFC-C6866S 6×8 2-Way Car Speakers (Pair)
| Speaker Type | Coaxial |
|---|---|
| Impedance | 4 Ohms |
| Power (Max/RMS) | 250W max / 30W RMS |
| Tweeter Diameter | 1 Inches |
| Woofer Diameter | 8 Inches |
The Kenwood KFC-C6866S 6×8 coaxial pair replaces worn factory speakers with a straightforward, reliability-focused upgrade for the Mitsubishi Lancer. These speakers use polypropylene paper cones for reinforced midbass and 1-inch PEI balanced-dome tweeters to clean up the high end while remaining safe to drive from a stock head unit. They install in most 6×8 openings with shallow 5/16" mounting depth, so they fit behind factory grilles without major door trimming. Practical features include a reinforced magnet circuit and a sound field enhancer intended to add presence without aggressive tuning. Expect clearer vocals and tighter midrange but modest low-bass since these are not subwoofer-grade drivers. Installation is simple for anyone familiar with door panels, though some vehicles may need adapter harnesses or minor wiring work. For a reliability-minded buyer wanting a durable, factory-compatible replacement that improves clarity without requiring an amp, these are a sensible choice.
Best for: A reliability-focused buyer who wants a durable, factory-compatible speaker upgrade for daily driving and clearer, more balanced music without adding amplifiers or complex installs.
Less Ideal for: Audiophiles seeking deep bass or drivers for high-power aftermarket systems should look at component speakers and powered subwoofers instead.
- Designed for direct replacement with shallow mounting depth to fit more factory locations
- Polypropylene paper cone and enlarged magnet circuit for stronger midbass and clear midrange
- 1-inch PEI balanced-dome tweeter improves high-frequency detail
- Safe to run on factory head units without requiring extra power or amplification
- Not designed to produce deep, heavy bass so low-end will be limited compared with a powered subwoofer
- Wiring harness or adapter may be required for some door speaker fittings
Verdict A reliable, easy-to-install 6×8 replacement that tightens midrange and highs for a Mitsubishi Lancer while leaving deep bass to a subwoofer.
2. JBL Club 8620 5×7/6×8 2-Way Coaxial Car Speaker Pair
| Speaker Type | 2-way coaxial |
|---|---|
| Power (RMS per speaker) | 55 watts |
| Impedance | 3 Ohms |
| Frequency Response | 65 Hz – 20 kHz |
| Sensitivity | 93 dB |
The JBL Club 8620 is a 5×7/6×8 two-way coaxial speaker pair aimed at improving factory sound in a car like the Mitsubishi Lancer. Each speaker delivers 55 watts RMS (165 watts peak per speaker) through a polypropylene woofer with a rubber surround and an edge-driven PEI dome tweeter, plus a small inline crossover to manage highs and lows. In a typical installation these fit common 6×8 openings or 5×7 spaces with adapter brackets and are used as front or rear replacements driven by the head unit or an aftermarket amp. You get a lively, upper-mid focused sound and good sensitivity that plays loud without obvious distortion when paired with modest power. Practical drawbacks are the low 3 ohm impedance which can ask a factory head unit to work harder and the omission of speaker wiring and some installation hardware, so you should plan to supply small screws, terminals, and wire. For owners who want an easy, noticeable upgrade without complex tuning, these are a straightforward option.
Best for: Convenience-driven buyers who want a simple, plug-in upgrade to improve daily listening without extensive tuning or professional installation.
Less Ideal for: Audiophiles seeking high-end clarity and tight bass or owners who prefer a drop-in speaker that requires zero additional installation parts or wiring.
- Designed for 5×7 or 6×8 openings so fits common Lancer door or rear locations
- Polypropylene woofer with rubber surround offers durable mid-bass performance
- Edge-driven PEI dome tweeter provides clear, extended highs
- Includes crossovers to protect tweeters and improve clarity
- 3 ohm impedance may overload some factory head units at high volume
- No installation wiring or comprehensive hardware included
Verdict A user-friendly, budget-conscious upgrade for a Mitsubishi Lancer that boosts mid-bass and treble clarity but may need extra wiring and can tax a weak factory head unit.
3. KICKER 43DSC6804 6×8" DS Series Coaxial Speakers with Harness (4-pack)
| Speaker Type | Coaxial 2-way |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 90 dB |
| Frequency Response | 45-20,000 Hz |
| Included Components | 2 pairs speakers and 2 pairs vehicle harnesses |
These KICKER DS Series 6×8 speakers are a plug-and-play upgrade designed to replace factory door speakers and come bundled with harnesses to simplify installation. In a Mitsubishi Lancer, they install into the door locations and connect directly to the factory wiring using the included Vixen harnesses, so no cutting or splicing is required for most models. The DS coaxial design pairs a polypropylene cone with a 1/2-inch dome tweeter, a sensitivity around 90 dB and a quoted RMS of 50 watts per pair, which produces clearer highs and fuller mids compared with many stock Lancer speakers. The shallow top-mount profile helps them fit inside narrow door cavities. Practical benefits include improved clarity at both low and high volumes and easier installation thanks to the harnesses. Limitations: these are not high-end component speakers and lack the output and refinement expected when driven by a dedicated amplifier and external crossover, so audiophiles seeking deep bass or stage separation will want to pair them with a subwoofer and amp or choose a higher-tier component set instead.
Best for: Performance-oriented buyers who want a straightforward, speaker-level upgrade to improve clarity and dynamics in their Mitsubishi Lancer without extensive wiring or custom work.
Less Ideal for: If your goal is serious low-end extension or high-fidelity staging driven by an aftermarket amp and crossovers, this bundle is not the final solution and you should consider component speakers plus a subwoofer and amplifier.
- Vehicle-specific harnesses allow plug-and-play installation with factory wiring in many vehicles
- Coaxial 2-way design with dome tweeter improves clarity and high-frequency detail over typical stock speakers
- Shallow top-mount profile fits tighter door cavities where depth is limited
- Includes two pairs (four speakers) so front and rear door locations can be upgraded together
- Not intended as an audiophile component speaker set when run with high-power amplification
- Limited low-frequency output compared with dedicated subwoofers or larger woofers
- Some vehicles may require verifying speaker polarity after installation for optimal sound staging
Verdict A convenient, factory-friendly 6×8 upgrade that noticeably improves clarity for Lancer owners but is best paired with a sub or amp for serious bass and high-end performance.
4. Hifonics ZS5768CX 5×7/6×8 Coaxial Car Speakers (Pair)
| Impedance | 4 Ohms |
|---|---|
| RMS Power Handling (CEA426B) | 90 |
| Max Power | 250 |
| Frequency Response +/-3dB | 46Hz-20kHz |
| Sensitivity (1W/1m) | 88 dB |
The Hifonics ZS5768CX pairs are coaxial car speakers that aim to upgrade factory sound without requiring an external amp. Each pair uses a neo-mylar soft dome tweeter, alpha-cellulose cones and a passive Butterworth crossover to deliver clear highs and tightened mid-bass from a single speaker unit. Installation is straightforward for vehicles that accept 6×8 or 5×7 footprints, making them suitable as direct replacements in many Mitsubishi Lancer speaker locations with minimal modification. Real-world benefits include louder output on stock head units, moisture-resistant rubber surrounds for longer life, and cooling features intended to reduce heat buildup during extended use. Limits are typical for budget speakers: sensitivity is moderate and sustained high-volume performance can strain the drivers, so they will not match the dynamics or headroom of higher-end component systems or powered setups. Fitment and sound depend on correct mounting and sufficient speaker depth in the specific Lancer location.
Best for: Practical, budget-conscious Mitsubishi Lancer owners seeking an affordable, factory-replacement sound upgrade without adding an amplifier.
Less Ideal for: Buyers who want maximum loudness, deep bass, or audiophile-grade separation should consider component speakers or a powered solution instead.
- Designed for 5×7 or 6×8 openings so installation fits many factory locations
- Neo-mylar soft dome tweeter for clearer highs compared with basic stock tweeters
- Rubber surrounds and anti-resonant steel basket improve durability and reduce distortion
- Passive crossover included for smoother handoff between woofer and tweeter
- Moderate sensitivity and power handling mean limited headroom at very high volumes
- Not intended to replace a dedicated component system for audiophile-level clarity
Verdict A cost-effective, easy-to-install speaker pair that noticeably upgrades factory sound in a Mitsubishi Lancer but will not match the volume headroom of higher-end systems.
5. Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs)
| Speaker Type | 3-Way Speaker |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 92 dB |
| Frequency Response | 28 – 22,000 Hz |
| Included Components | 4x Speakers, Coaxial Cables, Mounting Screws, Installation Manual |
The Alphasonik AS268P kit ships with two pairs of 6×8 3-way coaxial speakers, mounting screws, and pigtail leads so you can replace worn factory speakers without extra parts. Each speaker is rated at 350 watts peak (35 watts RMS each per manufacturer details) and runs at 4 ohms, with a stated frequency response down to about 28 Hz and 92 dB sensitivity that helps them play louder from a stock head unit. In practice they deliver clearer midrange and crisper highs than many factory Lancer door speakers and they come shallow enough to fit most 6×8 openings. Install is straightforward for a DIYer or technician and the included screws and wiring saves a trip to the parts store. Limitations are the modest RMS power and ferrite magnets, which means these will not replace a dedicated subwoofer for deep bass and they may distort under heavy amplifier-driven bass. Also these are not moisture rated so door sealing and damping matter for longevity. For a risk-averse buyer seeking a reliable factory-style upgrade, they improve everyday listening without a complicated install.
Best for: A risk-averse mainstream buyer who wants a straightforward, factory-style audio upgrade for daily driving and prefers proven, easy-to-install parts over high-end customization.
Less Ideal for: Audiophiles chasing deep bass or competitors seeking high-power components should consider higher-RMS speakers plus an amplifier and subwoofer instead.
- Includes two pairs plus screws and pigtail leads for a mostly plug-and-play replacement in common 6×8 openings
- 92 dB sensitivity helps produce louder sound from a stock head unit without adding an amp
- 3-way coaxial design improves vocal clarity and high-frequency detail compared with many factory speakers
- Low RMS power per speaker limits clean headroom and deep bass output without a subwoofer or amplifier
- Not water resistant so durability depends on door sealing and installation quality
Verdict A practical, easy-to-install 6×8 upgrade that boosts clarity and volume over factory Lancer speakers but needs a sub or amp for serious bass.
6. Kicker KS-Series 6×8 Coaxial Car Speakers (Pair)
| Tweeter size | .75 inch |
|---|---|
| Impedance | 4 Ohm |
| Speaker design | 2-way coaxial |
| Recommended amplifier power | 15-75 W |
| Frequency response | 45-21k Hz |
These Kicker KS-Series 6×8 coaxial speakers are a straightforward factory-style upgrade for a Mitsubishi Lancer, replacing worn stock speakers with better clarity and punch. They install as direct-fit replacements in most 6×8 openings and include mounting brackets and basic wiring hardware to simplify installation. The .75-inch tweeters and redesigned cones, voice coils, and crossovers deliver clearer highs and improved midrange definition while rubber surrounds and dampened polypropylene cones help the speakers handle louder playback without sounding harsh. In practice they respond well to both head-unit power and modest aftermarket amplification, revealing EQ adjustments that factory speakers often hide. Expect stronger low-mid impact but not deep sub-bass—these are midrange-focused coaxials, so pairing with a sub or proper crossover settings will fill out the bottom end. Build quality and included fitment hardware are practical benefits, though audiophiles seeking extreme power handling or component-style imaging will want separate components and a dedicated amp and crossovers instead.
Best for: Practical optimizers who want a noticeable factory-friendly sound upgrade for their Mitsubishi Lancer without added complexity or major modifications.
Less Ideal for: Audiophiles seeking component speaker imaging, very deep bass from door speakers, or installers wanting to push extremely high power levels without a dedicated amp and crossovers should consider component sets or separate subs instead.
- Direct-replacement fit with included mounting brackets and wiring for easier installation in many vehicles
- Redesigned cones, voice coils, and crossovers for clearer highs and improved midrange detail
- Rubber surrounds and dampened polypropylene woofers reduce distortion at higher volume
- Suitable for use with factory head units and benefits noticeably from modest aftermarket amplification
- Not intended to deliver deep sub-bass so a dedicated subwoofer is needed for low-frequency extension
- Power handling is midrange-focused so extreme amplification without proper crossover protection can overdrive them
Verdict A practical, factory-friendly 6×8 upgrade that cleans up highs and mids and gives big value for Mitsubishi Lancer drivers who want better sound without reworking the car.
7. ORION Cobalt CM6854 5×7/6×8 Midrange Bullet Loudspeakers (Pair)
| Impedance | 4 Ohms |
|---|---|
| Power (RMS) | 250W RMS |
| Power (Max) | 1000W Max Power |
| Sensitivity | 92 dB |
| Voice Coil | 1.5" High-temperature |
The ORION Cobalt CM6854 midrange speakers are built as a high-efficiency upgrade for vehicle audio, offering 250W RMS (1000W peak) and a 1.5" high-temperature voice coil to handle sustained output. They are typically used as replacement 6×8 or 5×7 midrange drivers in door or rear-deck locations and include a bullet-style tweeter to push higher frequencies without sacrificing mid-bass. In real-world use the 92 dB sensitivity means these speakers get loud with factory head units, and many users report strong clarity and impactful presence at high volumes. Practical benefits include relatively shallow mounting depth for easier fitment and robust power handling for future amplification. Important limitations are the large magnet assembly and physical size that can require adapter plates or modifications to fit some factory locations, and the speakers are not waterproof so they need proper mounting and sealing in door environments. Installation may also need different fasteners or mounting hardware depending on the Lancer's speaker cutouts.
Best for: Balanced all-round buyers who want a clear, loud midrange upgrade for daily driving and occasional high-volume listening without committing immediately to an amp.
Less Ideal for: Drivers who need completely splash-proof speakers for frequent wet exposure or those unwilling to modify mounting points should consider purpose-built sealed or smaller-size options instead.
- High sensitivity (92 dB) for strong output with factory head units
- 250W RMS power handling supports clean loud playback and future amplification
- Bullet tweeter extends high frequencies for clearer vocals and presence
- Shallow mounting depth improves chances of fitting into limited door or deck spaces
- Large magnet and overall diameter can require adapter plates or modified mounting in some vehicles
- Not rated waterproof so door installation needs proper sealing or baffles
Verdict A high-efficiency, high-power midrange upgrade that delivers loud, clear mids for a Mitsubishi Lancer when fitment and sealing are handled properly.
Choosing the Right Mitsubishi Lancer 6X8 Speakers: Key Factors to Consider
Mounting Depth and Fitment
Mounting depth determines whether a 6×8 speaker will physically fit in the Lancer's factory locations without interference from window mechanisms or door structures. Measure the depth from the mounting flange to the rear of the magnet and compare it to the available space behind the factory speaker opening.
A speaker that is too deep may require spacers, relocation, or trimming of door panels, which adds time and cost. Conversely, a unit that is too shallow may compromise cone excursion and bass output. Always confirm exact fitment dimensions and consider adapter plates if the mounting bolt pattern differs from the factory holes.
Power Handling and Sensitivity
Power handling, expressed as RMS and peak wattage, indicates how much continuous power a speaker can safely accept. Choose speakers with RMS ratings that align with your factory head unit or any aftermarket amplifier you plan to use to avoid overpowering or under-driving the speaker.
Sensitivity affects how loud a speaker will play with a given input. Higher-sensitivity speakers will generally play louder from a stock head unit, while lower-sensitivity designs often benefit from added amplification. Balance RMS and sensitivity to match your intended listening levels and source equipment.
Cone and Tweeter Materials
The materials used for the woofer cone and tweeter influence tonal balance, durability, and transient response. Stiffer cones tend to produce tighter bass and clearer midrange, while treated or coated materials offer better resistance to moisture in door installations.
Tweeter design and material affect high-frequency clarity and dispersion. Soft-dome tweeters can sound smooth and forgiving, while metal or composite tweeters may offer increased detail. Consider how these material choices align with your tonal preference and the acoustic characteristics of the Lancer's cabin.
Crossover Design and Integration
For coaxial speakers, the integrated crossover delegates frequencies between the woofer and tweeter and affects imaging and clarity. A well-designed crossover minimizes interference and preserves midrange detail. For component setups, external crossovers allow finer tuning and placement flexibility for the tweeter, which can greatly improve soundstage and stereo imaging.
Consider whether you prefer a simple coaxial swap or a component upgrade that requires additional mounting and wiring. The latter often yields better separation and fidelity but involves more installation complexity.
Installation Hardware and Adapter Availability
Check whether the speakers include mounting brackets, screws, and gasket material. Many aftermarket 6×8 speakers rely on vehicle-specific adapters to match the Lancer's bolt pattern and ensure a flush mount. Using proper adapters reduces rattles and ensures correct sealing against the door panel.
Lack of compatible hardware can lead to loose mounts, air leaks, and degraded sound. Confirm what is included and whether additional adapters or spacer rings will be required, especially if you want a straightforward, noninvasive swap.
Durability and Environmental Resistance
Door-mounted speakers are exposed to humidity, temperature swings, and road vibration, so durability matters. Look for corrosion-resistant grills, water-resistant surrounds, and robust motor structures that hold up to repeated use.
Long-lasting materials reduce the risk of cone delamination or surround failure over time. Durable construction also helps maintain consistent performance and reduces the likelihood of needing replacements or repairs down the road.
FAQ
Will 6×8 speakers fit in all Mitsubishi Lancer doors?
Fit depends on the Lancer year and the space behind the factory speaker opening. Many Lancer models accept 6×8 speakers, but you should check mounting depth and bolt pattern before purchase. Measure the available depth and compare it to the speaker's magnet clearance to avoid interference with window mechanisms.
Do I need an amplifier for 6×8 speakers in a Lancer?
An amplifier is not always required. If your selected 6×8 speakers have high sensitivity and match your head unit's output, they can perform well without added power. However, for lower-sensitivity speakers or to achieve higher volume with less distortion, a small aftermarket amplifier is often beneficial.
Are coaxial or component 6×8 speakers better for a Lancer?
Coaxial speakers offer easier installation and a compact solution with the tweeter mounted to the woofer, which is convenient for doors. Component speakers separate the tweeter and woofer, providing better imaging and potential soundstage improvements, but they require more installation effort and space for the tweeter placement.
How important is mounting hardware when replacing Lancer speakers?
Proper mounting hardware ensures a secure fit, good acoustic sealing, and minimal vibration. Using correct adapters or brackets can prevent rattles and maximize bass response. Make sure the speaker includes or is compatible with hardware that matches the Lancer's factory mounting points.
Can I use 6×8 speakers as a direct replacement without cutting or modifying doors?
Often you can install 6×8 speakers as a direct replacement when the speaker's dimensions align with the factory opening. Some aftermarket speakers may require spacer rings or adapters to match the bolt pattern. Significant cutting or trimming is usually avoidable with proper measurement and the right adapter.
How We Chose the Best Mitsubishi Lancer 6X8 Speakers
We evaluated candidates using criteria that reflect real Lancer owner needs: mounting depth and fitment to ensure an exact replacement in the Lancer's speaker locations; power handling and RMS ratings to match common factory or upgraded head units and amplifiers; frequency response and cone materials to judge overall clarity and midrange performance; sensitivity to estimate loudness with stock power; build quality and weather resistance for durability in door locations; and included hardware or adapter compatibility to simplify installation. We prioritized speakers that require minimal modification to the vehicle and that maintain proper speaker alignment and mounting integrity. Excluded items included generic listings that lacked clear dimensional specs or did not provide published RMS/power-handling figures. We also filtered out products intended solely for non-automotive use or that required significant custom fabrication. The result is a focused list of 6×8 options that balance sonic improvement with practical installation for the Mitsubishi Lancer.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Mitsubishi Lancer 6×8 speakers comes down to balancing fit, power handling, and the sound character you want. Prioritize mounting depth and bolt pattern compatibility first to avoid modification, then match power handling and sensitivity to your head unit or amplifier to ensure reliable performance. Consider build materials, crossover approach, and included hardware as secondary priorities that influence longevity and installation ease. Being realistic about installation complexity and intended listening levels will help you select a 6×8 option that delivers the best long-term value for your Lancer.
Explore More:
- Check out all Mitsubishi Lancer parts & accessories
- Explore Electronics
- Browse all Accessories
