Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want easier access and extra protection for your Infiniti QX60, choosing the right side step matters. The wrong fit or weak mounting can lead to poor performance, safety concerns, or premature wear, while a well-chosen option improves ingress and guards body panels during everyday use. This guide covers seven shortlisted side steps that meet fit, strength, and installation standards. We evaluated candidates for fitment, build quality, and mounting reliability to help you pick the right solution for your QX60. Read on to see which attributes to prioritize before shopping.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Tyger Auto 3.5" Rider Running Boards for Nissan Titan Crew Cab |  |
| Most Popular A crowd favorite that many people choose with confidence | TAC Viewpoint Running Boards for 2013–2016 Infiniti QX60 |  |
| Best Quality Built to a higher standard if you want something more solid | YZONA Crew Cab Running Boards Two-Tier Side Steps for Nissan Titan (Crew Cab) |  |
| Best Budget The cheapest option that still gets the job done reliably | SOENBOO Two-Stair Running Boards Side Steps for Nissan Frontier Crew Cab |  |
| Most Sold A high-volume bestseller chosen again and again | OEDRO Two-Stair Steel Running Boards, Bolt-On Side Steps for Crew Cab Trucks |  |
| Best Value for Money The sweet spot between price and what you get | TAC 3" Round Side Steps for 2013–2016 Infiniti QX60 / 2013–2021 Nissan Pathfinder, Black |  |
| Best Overall The best all-around choice for most situations | YZONA Two‑Step Crew Cab Running Boards for Nissan Titan Crew Cab |  |
1. Tyger Auto 3.5" Rider Running Boards for Nissan Titan Crew Cab
| Material | Carbon Steel |
|---|---|
| Step Width | 3.5 inches |
| Weight Capacity | 500 lb |
| Finish | Textured powder coat |
| Fit Type | Vehicle Specific Fit |
These Tyger Auto 3.5" rider running boards are a bolt-on side step intended to give easier entry and a more rugged look to a crew cab Nissan Titan. They use an oval tube design with a wider 3.5-inch step pad and textured non-slip surface for more stable footing when climbing in and out. The bars are carbon steel with an E-coated textured powder finish that helps resist rust and corrosion, and the kit includes driver and passenger boards plus mounting brackets and hardware for no-drill installation. Installation is straightforward for someone comfortable under the truck and typically takes under an hour per side when working with supplied brackets. The running boards are rated to support up to 500 lb and offer roughly 13 inches of ground clearance, making them practical for everyday use and light work. Expect solid, factory-quality fitment on compatible crew cab Titans, but be prepared to replace soft or mismatched fasteners if you encounter corroded threads on the vehicle during installation.
Best for: Reliability-focused buyers who prioritize a durable, factory-quality-looking side step that bolts on cleanly and holds up to regular use on a crew cab truck.
Less Ideal for: Shoppers seeking side steps specifically for the Infiniti QX60 or other non-Titan models should look for products made for their vehicle rather than these Titan-specific boards.
- Wider 3.5-inch step pad with textured non-slip surface for safer entry and exit
- Carbon steel construction with E-coated textured powder finish for corrosion resistance
- Includes complete hardware and brackets for bolt-on installation with no drilling required
- 500 lb weight capacity suitable for heavy users or cargo-assisted entry
- Designed and marked specifically for Nissan Titan crew cab fitment so not suitable for other vehicle models
- Some customers report supplied bolts can be soft or may require replacement during installation
Verdict A sturdy, corrosion-resistant running board built for reliable, no-drill installation on Nissan Titan crew cabs, but not appropriate for other vehicle models.
2. TAC Viewpoint Running Boards for 2013–2016 Infiniti QX60
| Fitment | 2013–2016 Infiniti QX60 |
|---|---|
| Step width | 5.5 inches |
| Material | Extruded aluminum frame, stainless steel edge |
| Mounting | Vehicle-specific brackets, bolt-on installation |
These TAC Viewpoint running boards are a vehicle-specific side step designed to bolt onto the 2013–2016 Infiniti QX60 and give passengers an easier, more secure way to enter the SUV. They install with custom brackets and include the mounting hardware and instructions so a competent DIYer can complete the job without cutting or drilling in most cases. The boards use an extruded aluminum frame with a corrugated 5.5-inch rubber step pad and a marine-grade T304 stainless-steel edge for improved corrosion resistance and a finished look that matches factory trim. In practice they make getting into the QX60 easier for children and shorter adults and add a cleaner, upgraded appearance to the rocker area. Some installers report fiddly hardware, occasional need to trim or adjust bolt plates, and substitution parts may be required for certain trims, so plan for a few hours and basic hand and socket tools. The boards offer good strength and weather resistance but replacement rubber/plastic parts are not sold separately by the maker, which may affect long-term refresh options.
Best for: Buyers focused on convenience who want a factory-like, bolt-on step that makes daily entry and exit easier and can be installed at home or by a shop with minimal fuss.
Less Ideal for: Shoppers seeking modular systems with separately replaceable trim pieces or those who want a lifetime maintenance program should consider alternatives that sell spare parts or longer warranties.
- Vehicle-specific fit for 2013–2016 Infiniti QX60 for straightforward alignment
- Aircraft-grade extruded aluminum frame with marine-grade T304 stainless-steel edge for corrosion resistance
- Wide 5.5-inch corrugated rubber step pad for slip resistance and comfortable footing
- Comes with custom brackets and mounting hardware for bolt-on installation without factory modification
- Polished edge and black step pad improve the SUV’s appearance while matching chrome trim
- Some installs require trimming or minor modification to bolt plates for certain trim variations
- Supplied fasteners and washers may be insufficient or of marginal quality for heavy reuse
- Rubber/plastic step components are not offered separately by the manufacturer for later replacement
Verdict A convenient, factory-style running board for the QX60 that improves passenger access and appearance but may need small on-vehicle adjustments and has limited replaceable trim options.
3. YZONA Crew Cab Running Boards Two-Tier Side Steps for Nissan Titan (Crew Cab)
| Material | Carbon Steel |
|---|---|
| Exterior Finish | Powder Coated |
| Weight Limit | 550 Pounds |
| Automotive Fit Type | Vehicle Specific Fit |
These YZONA running boards are a beefy, bolt-on side step meant to make getting in and out of a crew cab easier and to provide an extra low step for roof access. Built from 2 mm carbon steel with a black powder coat and a stamped non-slip surface, each side is rated to support up to 550 pounds and the two-tier layout gives a lower second step for lifted trucks or taller vehicles. Installation uses vehicle-specific brackets and mounting holes so no drilling is required, and the manufacturer says setup takes about 20 minutes for a complete install. In real-world use you can expect solid, no-bounce footing and good ground clearance thanks to the drop-down pad. The finish and heavy steel make these durable, though like any coated steel product they may show surface rust if the coating is scratched and will require periodic touch-up in harsh climates. Fitment and instructions are tailored to crew cab Nissan Titan models, so expect the clearest alignment on those trucks rather than other makes or models.
Best for: Performance-oriented buyers who prioritize rugged, functional hardware and need a strong, low-profile step solution for taller crew cab SUVs or trucks.
Less Ideal for: Owners seeking parts specifically engineered and guaranteed for the Infiniti QX60 or other non-truck luxury SUVs should consider options made for that vehicle class instead.
- Heavy-duty 2 mm carbon steel construction for strong, stable stepping under load
- Powder-coated finish and stamped non-slip surface improve corrosion resistance and traction
- Two-tier step design provides an additional lower step for easier roof access and lifted vehicles
- Bolt-on, vehicle-specific brackets that install without drilling for faster fitting
- Designed and marketed for Nissan Titan crew cabs so fit and instructions may not apply to other vehicles
- Powder-coat can be damaged by chips or scrapes which may lead to corrosion over time
Verdict Sturdy, no-drill steel running boards with a lower secondary step deliver excellent practical access for tall crew cab trucks but are truck-focused rather than suited to an Infiniti QX60.
4. SOENBOO Two-Stair Running Boards Side Steps for Nissan Frontier Crew Cab
| Material | Carbon Steel |
|---|---|
| Vehicle Service Type | Running Boards Side Steps Compatible for 2005-2025 Nissan Frontier Crew Cab |
| Weight Limit | 550 Pounds |
| Exterior Finish | Carbon Steel |
These SOENBOO two-stair running boards are a bolt-on side-step system intended to make getting into taller crew cab trucks easier. The dual-step layout places a lower intermediate step below the main bar, which helps when a truck has a lift kit or oversized tires and gives an extra foothold for roof access. Constructed from 2 mm carbon steel with a black powder coat, the bars resist corrosion in daily use and the laser-cut non-slip pads improve traction in wet conditions. Installation is designed to be simple using vehicle-specific mounting brackets and included hardware, though a few installers reported needing to leave fasteners loose while aligning parts and reusing some factory bolts in uncommon frames. The boards are rated to support about 550 pounds per side, so they work for most passenger loads and adult passengers stepping in. Trade-offs are typical for budget steel boards: they add noticeable weight and require routine touch-up of the finish over many years in harsh climates, and fitment is intended for specific crew cab models so check compatibility before buying.
Best for: Practical, budget-conscious buyers who prioritize getting a functional, sturdy step solution that improves access for taller crew cab SUVs or trucks without paying for premium aluminum or tubular systems.
Less Ideal for: Buyers seeking the lightest possible option or a luxury appearance should consider higher-end aluminum or integrated OEM-style steps instead.
- Two-step design aids entry for lifted trucks and provides an intermediate foothold
- Steel construction with black powder coat for corrosion resistance and sturdiness
- Bolt-on, vehicle-specific brackets simplify installation without drilling
- Laser-cut non-slip step pads improve traction in wet or muddy conditions
- Made from heavy steel so the assembly is bulky to handle and adds vehicle weight
- Finish may need periodic touch-ups in salted or coastal environments
Verdict A cost-effective, tough two-step steel running board that improves entry on taller crew cabs but adds weight and may need occasional finish maintenance.
5. OEDRO Two-Stair Steel Running Boards, Bolt-On Side Steps for Crew Cab Trucks
| Material | Carbon Steel |
|---|---|
| Finish | Black Powder Coated |
| Vehicle Service Type | Compatible with 2005-2026 Nissan Frontier Crew Cab |
| Weight Limit | 550 Pounds |
These OEDRO running boards are heavy-duty steel side steps that bolt to factory mounting points and add a lower main step plus a mid-level step to help reach the roof. They are typically installed on crew cab trucks using the included vehicle-specific brackets and hardware and are designed for everyday use like easier ingress/egress, loading roof racks, and protecting the rocker panels from road debris. Notable features include a two-stair layout for extra reach, hollow-design step pads to shed water and grit, triangular bracing for improved load distribution, and a black powder-coat intended to resist corrosion. The bars claim a 550 lb load capacity and a roughly 3.5-inch lower mounting position than many factory steps, which increases ground clearance. Downsides to keep in mind are the all-steel construction and finish, which several users report can show surface rust over time in harsh winter conditions, and the need for basic tools and two-person assistance for easiest installation. If corrosion resistance is a top priority, consider higher-grade coatings or stainless options.
Best for: Risk-averse mainstream buyers who want a factory-style, bolt-on running board that improves daily access and roof reach without major modification.
Less Ideal for: Drivers who prioritize long-term corrosion resistance in coastal or heavily salted-road regions should consider stainless or marine-grade alternatives.
- Two-step design provides an intermediate platform to reach roof racks or cargo more easily.
- Vehicle-specific brackets and bolt-on installation use factory holes for straightforward fitment.
- Hollow step pads reduce water and debris buildup for safer footing.
- Triangular structural bracing and all-steel tubing deliver a high stated load capacity.
- Powder-coat finish may develop surface rust in winter salt or harsh climates.
- All-steel construction is heavier and less corrosion-resistant than stainless alternatives.
Verdict Sturdy, bolt-on two-step steel running boards that improve access and roof reach but may require extra corrosion protection for long-term durability.
6. TAC 3" Round Side Steps for 2013–2016 Infiniti QX60 / 2013–2021 Nissan Pathfinder, Black
| Compatible vehicles | 2013–2016 Infiniti QX60 |
|---|---|
| Tube diameter | 3 inches |
| Material | Mild Steel |
| Finish | Gloss black powder coat |
These TAC 3" round side steps are a bolt-on running board package sold as a two-piece set for the Infiniti QX60 (2013–2016). They attach to factory mounting points using supplied brackets and hardware and provide a wide, UV-resistant non-slip step pad that makes entering and exiting the QX60 easier for kids and adults. The boards are made from mild steel with a gloss black powder coat intended to resist rust and abrasion, and the manufacturer highlights CNC bending and a double-layer finish for cleaner bends and dent resistance. Installation is generally doable for a competent DIYer using common sockets, though some owners report trimming or swapping a few fasteners and occasional bracket adjustments to get a precise fit on certain trim levels. The kit includes all mounting hardware and instructions, and seller support has helped some buyers resolve fitment issues. Expect solid visual and functional improvement for a modest outlay, but be prepared to address minor fitment quirks during installation and to check long-term durability of the step pads and plastic components over several years.
Best for: Practical optimizers who want a durable-looking, factory-style step that improves accessibility and appearance on a QX60 without paying for dealer parts.
Less Ideal for: Buyers who want a completely plug-and-play, maintenance-free solution with guaranteed long-term plastic component replacements from the manufacturer should consider alternatives or OEM options.
- Designed specifically to fit 2013–2016 Infiniti QX60 mounting points
- Heavy duty mild steel tube construction with gloss black powder coat for corrosion resistance
- Wide UV-resistant non-slip step pads improve footing for passengers
- Includes custom brackets and mounting hardware for bolt-on installation
- Seller support available to resolve fitment issues
- Some installs require minor modification or trimming of hardware for perfect fit on certain trim levels
- Plastic/rubber step pad pieces have reported degradation after a few years on some units
- A few customers noted missing or undersized washers and occasional broken bolt plates in the box
Verdict A cost-conscious, factory-style side step for the QX60 that delivers solid function and looks but may need minor DIY adjustments and has some long-term plastic durability concerns.
7. YZONA Two‑Step Crew Cab Running Boards for Nissan Titan Crew Cab
| Material | Carbon Steel |
|---|---|
| Exterior Finish | Powder Coated |
| Vehicle Service Type | Compatible for 2004-2025 Nissan Titan & Titan XD Crew Cab |
| Weight Limit | 550 Pounds |
| Automotive Fit Type | Vehicle Specific Fit |
These YZONA running boards are a robust, bolt‑on side step system built around a thick carbon steel main tube and a two‑tier step platform. They attach using vehicle‑specific brackets and hardware so installation is straightforward without drilling. The raised, oversized tread and laser‑cut non‑slip pattern give secure footing in wet conditions, and the powder coat helps resist rust and road corrosion. The two‑step design makes roof access and stepping up easier on taller or lifted trucks. Each side is rated to support heavy loads, and the hollow step area helps shed water and reduce wind drag. Downsides are the prominent main tube and angled support bars, which some users find catch heels when stepping down, and the instructions can be terse which may lengthen a solo install. For a balanced buyer wanting durable looks, improved ingress/egress, and strong load capacity, these boards deliver practical performance but require mindful foot placement when exiting the vehicle.
Best for: Balanced buyers who want a rugged, factory‑quality side step that improves daily access and adds a tough, cohesive look to their truck while prioritizing durability and practical function.
Less Ideal for: Buyers who need a low‑profile, fully flush step or who frequently require an unobstructed step‑down motion should consider a different low‑step or retractable solution.
- Heavy‑gauge carbon steel main tube for strong load capacity and vehicle protection
- Two‑tier step layout improves roof access and helps with lifted trucks
- Powder‑coated finish for corrosion resistance and long outdoor life
- Laser‑cut non‑slip tread provides secure footing in wet or snowy conditions
- Prominent top tube and diagonal supports can catch heels when stepping down for some users
- Assembly instructions are sparse which can slow a solo install
Verdict Sturdy, two‑step bolt‑on boards that add durable function and style, but watch your step when exiting due to the large top tube.
Choosing the Right Infiniti QX60 Side Step: Key Factors to Consider
Fitment and Vehicle-Specific Design
A side step engineered for the Infiniti QX60 will align with the vehicle s factory mounting points and body contours, which reduces installation complexity and ensures secure attachment.
Poorly matched steps can require drilling or adapter brackets that compromise strength or aesthetics. Confirming model-year compatibility and whether the design interferes with doors, rocker trim, or ground clearance helps avoid surprises during installation and daily use.
Mounting Hardware and Installation
The quality and completeness of the mounting kit directly affect safety and longevity. Look for kits that include brackets, bolts, and spacers intended for the QX60 s frame and that use grade-appropriate fasteners.
Consider how much vehicle disassembly is needed, whether special tools are required, and whether installation instructions are clear. Easier installation reduces the risk of incorrectly torqued connections and makes future removal or service simpler.
Material and Corrosion Resistance
Materials such as stainless steel, aluminum, or properly coated steel determine how well the step resists rust, road salt, and weather exposure. Corrosion resistance impacts both appearance and structural integrity over time.
Surface finishes like powder coating, anodizing, or electroplating extend service life, but quality varies. Check for sealed welds and protective coatings on hidden surfaces where corrosion often begins.
Weight Capacity and Load Distribution
Rated load capacity indicates how much weight a step can support safely. This matters for users who routinely step with heavy loads, assist children or older passengers, or use the step as a platform for roof access.
Beyond the published capacity, the design of brackets and how load is transferred into the frame affects real-world performance. Wide, evenly supported step surfaces distribute weight better than narrow bars.
Ground Clearance and Step Height
Step height relative to the vehicle s rocker and the ground affects both usability and off-road clearance. A low step is easier to use but can reduce clearance and catch obstacles; a higher step preserves clearance but may be harder to reach for some passengers.
Consider how the step changes approach angles and whether it remains functional with common loads like cargo carriers or seasonal tires.
Grip, Surface Design, and Safety
The stepping surface should provide positive traction in wet or icy conditions. Textured pads, stamped treads, or rubber inserts improve safety during entry and exit.
Also assess drainage and how debris or snow might accumulate. A design that sheds water and resists slipping reduces maintenance and the chance of accidents.
FAQ
Will a side step affect my Infiniti QX60 s ground clearance?
A properly designed side step will change the vehicle s effective ground clearance slightly, often lowering the lowest point compared with a stock rocker. The degree depends on the step s profile and how it mounts. If you frequently drive on rough roads, choose a style that preserves approach and departure angles.
Can I install a side step myself or should I get professional help?
Many side steps include vehicle-specific mounting kits and clear instructions that make DIY installation feasible for someone with basic tools and mechanical comfort. However, if the kit requires drilling, welding, or precise torque specs, professional installation ensures correct alignment and safety.
How important is corrosion protection for side steps?
Corrosion protection is very important because side steps are exposed to road salt, water, and gravel. Durable coatings and corrosion-resistant materials prolong structural life and appearance. Inspect welds and hidden surfaces as those areas often show early signs of corrosion.
Do side steps need regular maintenance?
Yes. Periodic cleaning to remove road grime and salt helps prevent corrosion. Check mounting hardware for tightness after the first few hundred miles and periodically thereafter. Address chips in the finish promptly to keep the underlying metal protected.
Will adding a side step change my vehicle s warranty or insurance?
Adding aftermarket accessories can have implications depending on warranty terms and insurance policies. In many cases properly installed accessories do not void a vehicle s warranty, but it depends on the specific warranty language and whether installation damages factory components. Check your warranty and insurance documents or consult the provider before installing.
How We Chose the Best Infiniti QX60 Side Step
We focused on products designed specifically to fit the Infiniti QX60 and prioritized concrete vehicle-focused criteria rather than general-purpose accessories. Key evaluation factors included fitment accuracy to the QX60 body and frame attachments, mounting hardware quality and compatibility, load capacity and rated weight support, corrosion resistance of materials and surface finishes, and long-term durability indicators such as weld quality and reinforcement design. We also considered ease of installation for a typical DIYer, availability of complete mounting kits, and the clarity of manufacturer fitment guidance. Excluded from consideration were generic or universal side steps lacking verified QX60-specific fitment data, items with incomplete mounting hardware, and products without clear material or load specifications. The result is a short list of options that meet specific fit, durability, and installation standards relevant to the Infiniti QX60.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a side step for an Infiniti QX60, prioritize fitment to factory mounting points, robust mounting hardware, and corrosion-resistant materials. Balance load capacity and step height to suit who uses the vehicle and how you drive. Tradeoffs typically involve ease of access versus ground clearance and between lighter materials and long-term durability. Focus on proven mounting designs and clear installation guidance to get a safe, long-lasting result.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
