Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading the speakers in your Nissan Murano can transform everyday drives into clearer, more detailed listening sessions. Choosing the right 6×8 option matters because fit, power handling, and installation depth directly affect sound quality and long-term reliability. This guide covers our shortlisted top picks for Murano-compatible 6×8 speakers and explains the evaluation criteria used to narrow the list. Read on for practical guidance on matching speaker specs to your car and audio goals.
Looking for other parts? See all Nissan Murano parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | ORION Cobalt CM6852 6×8 Mid-Range Bullet Car Speakers (Pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | JBL Club 8622F 6×8" Coaxial Car Speakers (Pair) |  |
| Best Quality Built to a higher standard if you want something more solid | KICKER 43DSC6804 6×8" DS Series Coaxial Speaker Kit with Harness for Ford F-150 |  |
| Best Budget The cheapest option that still gets the job done reliably | Hifonics ZS5768CX 5×7/6×8 Coaxial Car Speakers (Pair, 4-Pack) |  |
| Most Sold A high-volume bestseller chosen again and again | Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs) |  |
| Best Value for Money The sweet spot between price and what you get | KICKER DS-Series 6×8" Coaxial Car Speakers (Pair) |  |
| Best Overall The best all-around choice for most situations | Kicker KS-Series 6×8 Coaxial Car Speakers (Pair) |  |
1. ORION Cobalt CM6852 6×8 Mid-Range Bullet Car Speakers (Pair)
| Impedance | 2 Ohms |
|---|---|
| RMS Power | 250W |
| Max Power | 1000W |
| Voice Coil | 1.5" high-temperature |
| Sensitivity | 92 dB |
The ORION Cobalt CM6852 are mid-range bullet speakers built to deliver loud, clear mids for a vehicle sound system. They install in 6×8 openings and are typically used to upgrade factory mids or rear deck systems where vocal clarity and high output matter. Notable features include a 1.5" high-temperature voice coil, 250W RMS (1000W max) rating, and a cited efficiency around 92 dB that helps them play loud without excessive amplifier power. The bullet design extends high-frequency reach while preserving mid bass presence, and many users report dramatically better clarity and volume compared with stock speakers. Practical benefits for a Nissan Murano include punchy midrange and vocal presence that improve overall sound staging. Important limitations are the large magnet assembly that can cause fitment issues in some factory cavities and the need to confirm the Murano's speaker impedance and wiring if pairing with the factory amp, since a 2 ohm load requires compatible amplification to avoid stress on the vehicle electrical system.
Best for: A reliability-focused buyer who wants a durable, high-output midrange upgrade for a Nissan Murano and prioritizes consistent, loud performance over cosmetic fit and add-ons.
Less Ideal for: Buyers seeking a plug-and-play swap with guaranteed fit in all Murano locations or those who want integrated speaker grills and perfect factory aesthetics should consider alternatives or plan for adapters and minor modifications.
- High sensitivity (~92 dB) for strong output with factory head units or modest amps
- 250W RMS handling for sustained loud playback without immediate distortion
- 1.5" high-temperature voice coil designed for heat tolerance under heavy use
- Bullet mid/tweeter design extends high frequencies while maintaining midrange clarity
- Large magnet assembly may not fit behind some factory mounting locations without modification or adapter
- Sold as midrange pair without grills, so protective covers may need to be sourced separately
Verdict Powerful, high-sensitivity midrange speakers that deliver loud, reliable vocals for a Murano but may need fitment work due to a large magnet.
2. JBL Club 8622F 6×8" Coaxial Car Speakers (Pair)
| Speaker Type | Coaxial 2-way |
|---|---|
| Speaker Size | 6×8 inches |
| Impedance | 3 Ohms |
| Tweeter Diameter | 1 Inches |
| Woofer Material | Polypropylene |
The JBL Club 8622F 6×8" coaxial pair replaces factory door speakers to deliver clearer highs and stronger low-end for everyday driving in a Murano. They use a UV-resistant polypropylene woofer and a silk-dome tweeter in an edge-driven configuration, which translates to louder, more detailed mids and highs and improved punch without adding a separate amp. The speakers have a low-impedance design so a Nissan Murano head unit can push them harder for noticeably fuller sound, though they also benefit from extra power if you add an amplifier. Installation is typical for a 6×8 swap and fits factory mounting in most Murano applications, so you get a quick, convenience-focused upgrade. Some users report sensitivity to extreme volume and occasional quality control issues, so check fit and wiring during install. These are a practical step up from stock speakers when you want clearer music and easier installation rather than a full system overhaul.
Best for: Convenience-driven buyers who want a simple, factory-compatible audio upgrade for a Nissan Murano that improves clarity and bass without a complex install or additional components.
Less Ideal for: Audiophiles seeking maximum power handling or deep bass who plan a powered aftermarket system with dedicated amplifiers should look at component sets and subwoofers instead.
- Factory-style 6×8" form factor for straightforward swap into factory locations in a Murano
- Polypropylene woofer with Plus One cone area for stronger low-frequency output than many stock speakers
- Edge-driven silk-dome tweeter for clearer high-frequency detail
- Low-impedance design allows more power from a factory head unit for louder output without immediate need for an amp
- Not designed for sustained extreme volume; distortion and vibration reported at very high levels
- Some buyers report occasional reliability or quality-control issues with individual units
Verdict A convenient, factory-style 6×8" upgrade for Nissan Murano owners who want clearer sound and fuller bass without changing mounting or adding an amp.
3. KICKER 43DSC6804 6×8" DS Series Coaxial Speaker Kit with Harness for Ford F-150
| Impedance | 4 Ohms |
|---|---|
| Sensitivity | 90dB |
| Frequency Response | 45-20,000 Hz |
| Power (RMS/Peak) | 50W RMS / 200W Peak |
| Tweeter Diameter | 12.7 Millimeters |
These KICKER DS Series 6×8 speakers are a ready-to-install option that brings a noticeable upgrade in clarity and output compared with basic factory door speakers. Designed as a pair-of-pairs kit with matching harnesses, they plug into the stock wiring for fast swapouts and deliver strong midrange presence, clean highs from the 1/2" dome tweeters, and controlled low end for a coaxial design. The polypropylene cones and ribbed surround help keep distortion down at higher volumes, and the 50 watt RMS / 200 watt peak spec means they can handle more power than many stock units without failing. Installation is typically a simple door replacement using the included Vixen harnesses, though buyers should confirm polarity during wiring to get the best tonal balance. These are built as an OEM-style factory replacement aimed at improving daily listening and higher-volume playback, but they are not a substitute for component systems or separate amplifiers and subwoofers if you seek deep bass or audiophile-grade staging.
Best for: Performance-oriented buyers wanting a high-quality, straightforward speaker upgrade that improves clarity and volume for everyday driving and spirited listening without needing an amp.
Less Ideal for: Audiophiles seeking deep sub-bass or precise imaging who plan to build a component system with external amplification should look at separates and dedicated woofers instead.
- Plug-and-play harnesses included for quick door replacement without cutting factory wiring
- 2-way coaxial design with 1/2" dome tweeter improves clarity and high-frequency detail
- Polypropylene cone and ribbed surround keep midbass tight and reduce distortion at higher volumes
- Handles 50 watts RMS (200 watts peak) for stronger output than many stock speakers
- Coaxial configuration limits soundstage and low-bass extension compared with component systems
- Some vehicle installations may require checking or reversing polarity for best performance
Verdict A high-output, plug-and-play 6×8 upgrade that adds clarity and volume for drivers who want better sound without a full component or amp-based overhaul.
4. Hifonics ZS5768CX 5×7/6×8 Coaxial Car Speakers (Pair, 4-Pack)
| Impedance | 4 Ohms |
|---|---|
| RMS Power (CEA426B) | 90 W |
| Frequency Response +/-3dB | 46 Hz – 20 kHz |
| Sensitivity (1W/1m) | 88 dB |
| Crossover Point | 4 kHz |
These Hifonics ZS5768CX coaxial speakers are a budget replacement aimed at restoring clarity and punch to factory-installed locations in a Murano. Sold as two pairs (four speakers), they combine alpha-cellulose cones, a Neo-Mylar soft-dome tweeter, and a passive Butterworth crossover to cover roughly 46 Hz to 20 kHz with a claimed 90 watts RMS per speaker (CEA426B). Typical installation is direct swap into the vehicle’s 6×8 mounting positions with spade connectors or soldering. In everyday use they bring clearer highs and stronger midbass than most stock speakers, and the rubber surround and stamped steel basket help resist moisture and flex under normal driving. Limitations for a Murano: sensitivity around 88 dB and the quoted power handling mean they benefit from a modest head unit or small amplifier for best dynamic range, and very aggressive, high-volume listening may push them past their limits. Fit and sound are a strong value if you want a noticeable upgrade without replacing the factory speakers and wiring.
Best for: Budget-conscious owners looking to improve the Murano’s factory sound without reworking wiring or adding a big amplifier; ideal for drivers who prioritize clearer vocals and punchy midbass at everyday listening levels.
Less Ideal for: Audiophiles who demand very high volume, extreme low bass, or pro-level power handling should consider higher-end component systems or dedicated amplifiers instead.
- Sold as two pairs so you can replace front and rear or both doors at once
- Alpha-cellulose cone and Neo-Mylar tweeter provide clearer highs and tighter midbass than typical stock speakers
- Rubber surround and anti-resonant stamped steel basket improve durability and reduce distortion
- Passive crossover included for smoother transition to the tweeter
- Sensitivity is moderate so you may need a small amp for stronger dynamics at low distortion
- Not rated as waterproof, so long-term exposure to moisture in rear deck locations could be a concern
Verdict A practical, wallet-friendly speaker set that noticeably upgrades factory sound in the Murano but performs best with a modest amplifier rather than extreme volume.
5. Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs)
| Speaker Type | 3-Way Speaker |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 92dB |
| Included Components | 4x Speakers, Coaxial Cables, Mounting Screws |
The Alphasonik AS268P ships as two pairs of 6×8-inch, 3-way coaxial speakers intended as a direct replacement for common factory door locations. In use they serve as a budget upgrade to a stock Murano audio system by offering a claimed 92 dB sensitivity and a broad frequency range down to 28 Hz, which helps vocals and midrange come through cleaner at deck power. Each speaker is rated 350 watts peak (35 watts RMS each), so they work well driven by a factory head unit without requiring an amplifier, and the kit includes pigtail leads and mounting screws for a straightforward install. Practical benefits include fuller sound versus many OEM speakers and easier installation for owners who prefer a simple, risk-averse swap. Limitations are typical of low-cost 3-way kits: bass impact will remain limited without a subwoofer and the small ferrite magnets may restrict headroom compared with higher-end woofers, so expect improved clarity rather than dramatic bass performance.
Best for: A risk-averse mainstream buyer who wants a straightforward, budget-friendly upgrade to their Nissan Murano's factory speakers with minimal installation hassle and no extra amplification.
Less Ideal for: Audiophiles seeking deep low-end or high-powered systems and owners planning to drive speakers with a high-output external amplifier should consider higher-end component options instead.
- Includes two pairs and basic installation hardware and pigtails for easier swap-in replacement.
- High sensitivity (92 dB) that makes the speakers louder on factory head units without an amp.
- 3-way coaxial design improves midrange and treble clarity compared with typical stock speakers.
- Low RMS power (35 W per speaker) and ferrite magnets limit clean headroom and deep bass output.
- Not water resistant so durability may be lower in damp door locations over many years.
Verdict A convenient, affordable replacement that reliably improves clarity and volume on a Murano's stock system but will need a sub or amp for real bass performance.
6. KICKER DS-Series 6×8" Coaxial Car Speakers (Pair)
| Impedance | 4 Ohms |
|---|---|
| Sensitivity | 90 dB |
| Peak Power Handling | 200W |
| Frequency Response | 45-20k hz |
The KICKER DS-Series 6×8 coaxial pair is a straightforward drop-in speaker upgrade that brings clearer highs and fuller midrange to a factory audio setup. Designed to fit common vehicle door openings, these speakers use stiff polypropylene cones, ribbed UV-treated foam surrounds, and PEI dome tweeters to deliver clean treble and improved sensitivity so they play louder from a factory head unit. Typical use is rear or front door replacement in a vehicle like the Nissan Murano where you want better clarity without adding an amplifier or major door modifications. Notable features include bass-boost tuning for stronger low-end presence, a high-sensitivity motor for more output on head-unit power, and zero-protrusion tweeters that avoid interference with factory grilles and window mechanisms. Practical benefits are easy installation, a clear midrange for vocals, and noticeably louder playback compared with worn factory speakers. Limitations are that they are not waterproof and they rely on the head unit for power so bass will not match a powered subwoofer or a system with an external amplifier.
Best for: A practical optimizer seeking a cost-effective, no-fuss upgrade to their Nissan Murano factory speakers who prioritizes clearer sound and easy installation over adding amplifiers or subs.
Less Ideal for: Audiophiles building a high-power aftermarket system or buyers who want heavy bass from door speakers without adding a powered subwoofer or amplifier should look elsewhere.
- Drop-in fit design for easy replacement without major door modification
- High sensitivity motor that delivers louder sound from a factory head unit
- PEI dome tweeters with zero protrusion preserve clarity and avoid grille interference
- Bass-boost tuning provides fuller low-end compared with typical factory speakers
- Not rated as waterproof so exposure to moisture inside doors could be a concern
- Does not include wiring adapters for vehicle-specific connectors
Verdict A budget-friendly, drop-in upgrade for the Nissan Murano that improves clarity and volume on factory power but is not a substitute for a powered bass system.
7. Kicker KS-Series 6×8 Coaxial Car Speakers (Pair)
| Tweeter size | 0.75 inch |
|---|---|
| Impedance | 4 Ohm |
| Speaker design | 2-way coaxial |
| Frequency response | 45-21 kHz |
The Kicker KS-Series 6×8 coaxial pair replaces factory speakers to deliver clearer highs and fuller mid-bass without extensive modifications. They are built with damped polypropylene woofers and rubber surrounds for tighter midrange and stronger low-end punch than typical factory units, and the 0.75" tweeters provide crisp high-frequency detail. Installation is straightforward for common 6×8 openings and the minimal tweeter protrusion helps them fit into many factory mounting locations on the Nissan Murano without trimming. These speakers handle moderate amplifier power and respond well to an aftermarket head unit or small amp, improving imaging and making EQ adjustments more effective. Expect noticeably better clarity and volume before adding a dedicated subwoofer. Limitations are that they are coaxials so they will not match the separation or extended bass of a component set, and very low bass will still require a sub for serious bass lovers. Also, like most upgrades, gains depend on proper enclosure, wiring, and damping in the door or speaker cavity.
Best for: A balanced all-round buyer who wants a reliable, factory-friendly upgrade that noticeably improves everyday listening in a Nissan Murano without complex components or major installation work.
Less Ideal for: Audiophiles seeking maximum soundstage separation or bass heads who plan to rely on the speakers alone instead of adding a separate subwoofer should consider component speakers or a system with a sub instead.
- Designed for direct replacement fit in many factory 6×8 locations with minimal tweeter protrusion
- Internally damped polypropylene cones and rubber surrounds for cleaner midrange and stronger bass impact
- 0.75" tweeters deliver clear highs and improved imaging over stock speakers
- Handles moderate amplifier power so performance scales with a basic aftermarket head unit or small amp
- Coaxial design cannot match the soundstage separation of component systems
- Will not reproduce deep sub-bass—requires a subwoofer for heavy bass
- Some vehicles may still need adapter brackets or minor fitment checks despite minimal tweeter protrusion
Verdict A practical, Murano-friendly 6×8 upgrade that gives clear highs and stronger mid-bass with an easy install while still needing a sub or components for the deepest bass.
Choosing the Right Nissan Murano 6X8 Speakers: Key Factors to Consider
Mounting Depth And Fit
Mounting depth determines whether a speaker will physically fit behind the factory grille and within the door or other mounting location. Measure the available depth and compare it to a speaker’s mounting specification to avoid contact with window mechanisms or inner door hardware.
Adapter rings and shallow-mount designs can solve many fit issues, but they change installation complexity and may affect resonance. Choosing a model with appropriate depth and included mounting hardware reduces installation time and helps maintain factory appearance.
Power Handling And Sensitivity
Power handling shows how much continuous and peak power a speaker can accept without damage, while sensitivity indicates how loudly it will play from a given amplifier output. Match speaker RMS and peak ratings to your head unit or amplifier to avoid distortion or blown drivers.
Higher sensitivity speakers are helpful when you plan to run from a low-power factory head unit, whereas lower-sensitivity, high-power models pair better with an external amplifier for cleaner dynamic range.
Speaker Type And Crossover Design
Coaxial speakers combine tweeter and woofer into one assembly and simplify installation, making them a common upgrade path. Component systems separate drivers and include dedicated crossovers, which can improve imaging and clarity but require more planning for mount locations and wiring.
Consider whether you want the simplicity of a coaxial or the performance potential of component speakers, and look at the quality of the crossover parts because they affect frequency balance and tweeter protection.
Cone And Surround Materials
The cone material influences tone, transient response, and durability. Polypropylene cones resist moisture and handle low frequencies well, while treated paper or composite cones can provide a more natural midrange. Surround materials such as rubber typically outlast foam and maintain flexibility in varying temperatures.
Durable materials matter for door-mounted speakers because they are exposed to humidity and temperature changes. Choosing robust cone and surround construction helps preserve sound quality over time.
Tweeter Quality And Placement
Tweeters handle the high-frequency detail that gives music air and definition. The size, type, and mounting flexibility of a tweeter affect soundstage and clarity. Some coaxial designs have fixed tweeters, while component tweeters often offer adjustable mounts and multiple mounting options.
For best results in a Murano, consider how tweeter placement influences imaging and whether the tweeter needs a specific mount or adapter to aim sound toward listeners for clearer highs.
Installation Hardware And Ease
Included mounting hardware, grills, and trim adapters simplify fitting speakers into factory openings and maintain a clean look. Some speakers require additional brackets, spacers, or minor door panel modification; others are designed for straightforward bolt-in installation.
Evaluate how much time and effort you want to spend on installation and whether professional help will be needed. Easier installs reduce cost and risk of damage to door panels or wiring harnesses.
FAQ
Will 6×8 speakers fit in every Nissan Murano door location?
It often depends on the model year and the specific mounting pocket depth. Many Murano models accept 6×8 footprint speakers, but you should verify mounting depth and screw hole spacing before purchase. Using adapter rings or shallow-mount options can resolve common fit issues without major modification.
Do I need an amplifier for 6×8 speakers in my Murano?
It depends on the speakers’ sensitivity and your desired volume and clarity. Higher-sensitivity speakers can sound good on a factory head unit, while lower-sensitivity or high-power designs benefit from an external amplifier to reduce distortion and unlock better dynamics. Matching speaker ratings to the available power is the safest approach.
Are coaxial 6×8 speakers a good choice for a simple upgrade?
Yes, coaxial 6×8 speakers are a practical upgrade because they combine tweeter and woofer in one unit and require minimal changes to wiring and mounting. They provide a noticeable improvement over worn factory speakers and are easier to install than component systems, although they may not offer the same imaging potential.
How important is mounting depth when choosing replacement 6×8 speakers?
Mounting depth is very important because insufficient clearance can cause contact with window mechanisms or door internals and lead to damage or rattling. Always measure available depth and allow a margin for the speaker frame, wiring, and any adapter plates you plan to use.
Can I reuse the factory speaker wiring when installing aftermarket 6×8 speakers?
In most cases you can reuse the factory wiring, but inspect connectors and wire condition before installation. Some aftermarket speakers include adapter harnesses for a plug-and-play connection, while others may require crimping or soldering. Ensuring solid connections helps prevent noise and intermittent signals.
What should I expect in terms of sound improvement with 6×8 speaker replacements?
Replacing worn or low-quality factory speakers with well-built 6×8 units usually yields clearer mids, tighter bass response, and more detailed highs. The actual improvement depends on the speaker design, materials, and whether the system is powered by an adequate source. Proper fit and installation also influence perceived gains.
How We Chose the Best Nissan Murano 6X8 Speakers
We focused on speakers sized and shaped to fit the Nissan Murano mounting locations and prioritized factors that affect real-world performance and installation. Key evaluation criteria included mounting depth and adapter compatibility to ensure proper fit, power handling and sensitivity to match common factory or aftermarket amplifiers, and cone and surround materials for durability and sound clarity. We also assessed crossover design and tweeter quality where applicable for accurate midrange and treble reproduction, plus build quality and grille/trim fit for a clean installation. We excluded speakers that require extensive custom fabrication or permanent vehicle modification, and we left out models with unclear technical specs. The goal was to surface 6×8 options that balance sound improvement, straightforward installation, and long-term reliability for Nissan Murano owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize fit and power matching when upgrading to Nissan Murano 6×8 speakers. Confirm mounting depth and mounting-hole alignment first, then choose a speaker whose power handling and sensitivity align with your head unit or amplifier. Balance desired sound characteristics against installation complexity. If you want a straightforward upgrade, coaxial 6×8 options simplify installation. If you seek better imaging and detail and are willing to plan mounts, component solutions can offer advantages.
Explore More:
- Check out all Nissan Murano parts & accessories
- Explore Electronics
- Browse all Accessories
