Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Picking the right oil filter housing for a Nissan Rogue matters because the housing affects oil flow, sealing reliability, and how easy routine maintenance will be. A poorly fitting or leaky housing can cause oil loss, engine stress, and extra repair time. This guide covers seven shortlisted oil filter housings chosen for their suitability on the Nissan Rogue. We evaluated fitment accuracy, seal and gasket quality, and resistance to common failure modes to help you find an option that reduces downtime and long-term risk. Read on for the criteria we used and practical buying considerations.
Looking for other parts? See all Nissan Rogue parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | MAHLE Original GS33747 Engine Oil Filter Housing Seal Kit |  |
| Most Popular A crowd favorite that many people choose with confidence | APSG Toyota Genuine Oil Filter Kit with Aluminum Housing Cap and Wrench |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Oil Cooler and Filter Housing Assembly (Aluminum) |  |
| Best Budget The cheapest option that still gets the job done reliably | INFINAUTO Engine Oil Filter Housing Assembly (Aluminum) |  |
| Most Sold A high-volume bestseller chosen again and again | YITHSWAY Aluminum Engine Oil Cooler with Oil Filter Housing Adapter |  |
| Best Value for Money The sweet spot between price and what you get | GAOBEN Aluminum Engine Oil Filter Housing with Oil Cooler (926-876/926-959) |  |
| Best Overall The best all-around choice for most situations | MNJWS Aluminum Oil Filter Housing and Oil Cooler Kit for 3.6L Pentastar Engines |  |
1. MAHLE Original GS33747 Engine Oil Filter Housing Seal Kit
| Brand | MAHLE |
|---|---|
| Material | Oe Equivalent |
| Model | GS33747 |
| Manufacturer | MAHLE Original |
This MAHLE GS33747 kit supplies the sealing components used around the engine oil filter housing to stop oil leaks and restore a tight seal. It is typically used during an oil filter housing service or when a persistent leak appears at the housing flange. The kit is built to factory-equivalent standards and packaged to keep parts organized and protected until installation. In practice the gasket material is pliable and durable, which reviewers say delivers a reliable long-term seal and a correct fit on affected engines. Installation can be fiddly on some engines because access is limited and proper torqueing of the housing fasteners is important to avoid deformation of the seal, so plan for moderate mechanical skill or a mechanic for installation. If you want a direct, high-quality replacement gasket that matches factory fit and reduces the chance of repeat leaks, this kit is a solid choice, but it does not simplify the labor required to reach the housing or the care needed during reassembly.
Best for: Reliability-focused buyers who prioritize a factory-quality replacement and long-term leak prevention during scheduled maintenance or repairs.
Less Ideal for: Users looking for an easy DIY with minimal disassembly or first-time home mechanics unwilling to follow torque specs should consider professional installation or a different service option.
- Factory-equivalent materials and construction for reliable sealing.
- Packaged in a shrink-wrapped tray so parts stay organized and protected.
- Pliable gasket material that reviewers report stops oil leaks effectively.
- Clear fitment and reviews indicating correct fit on affected engines.
- Requires careful installation and correct torqueing of housing fasteners to avoid seal deformation.
- Does not include fasteners or tooling; additional parts or shop time may be needed.
Verdict A factory-quality replacement seal kit that stops oil filter housing leaks when installed correctly but needs careful installation to perform as intended.
2. APSG Toyota Genuine Oil Filter Kit with Aluminum Housing Cap and Wrench
| Brand | APSG |
|---|---|
| Material | Aluminum, Paper |
| Thread Size | NPT 3/4" |
| Automotive Fit Type | Vehicle Specific Fit |
This kit replaces the factory plastic oil filter housing cap with a metal assembly and supplies a matching oil filter, cap plug, crush washer, and a dedicated cap wrench to simplify oil changes. It is typically used during routine service to remove the old plastic cap, swap the filter, and install the aluminum cap for greater durability and reduced risk of cracking when removing the cover. The metal housing resists cracking and feels more robust than stock plastic, while the included wrench and crush washer make installation and sealing straightforward for DIYers or quick shop visits. The kit is a practical convenience upgrade that lowers the chance of broken caps, stuck fittings, and messy on‑rack repairs. Limitations are that it is model‑specific and may require swapping the center tube or minor adjustments on certain vehicle variants, and the small plastic funnel in the kit can occasionally stick in the metal housing during drain procedures.
Best for: A convenience-driven buyer who values faster, less-fussy oil changes and wants a durable, one-kit replacement that reduces the chance of a broken housing during routine maintenance.
Less Ideal for: Owners seeking a universal part or those unwilling to check exact fitment or perform minor assembly swaps should look for an application-specific alternative or dealer-sourced parts.
- Aluminum housing cap is far more durable than stock plastic and reduces risk of cracking during removal.
- Includes oil filter, cap plug, crush washer, and a fitted wrench so you have all parts needed for a cap upgrade.
- Direct fit design for vehicles listed gives a straightforward swap with minimal modification in most cases.
- Not universally compatible; some vehicle variants need the center tube transferred from the old housing.
- The small plastic funnel/drain adapter can stick inside the metal housing during removal.
- Contains vehicle-specific fitment so buyers must confirm fit for their Rogue build year and engine.
Verdict If you want a convenient, longer-lasting replacement that eliminates fragile plastic housings and includes the wrench and sealing parts, this kit delivers—just confirm exact Nissan Rogue fitment before buying.
3. A-Premium Oil Cooler and Filter Housing Assembly (Aluminum)
| Material | Aluminum |
|---|---|
| Thread Size | M16 |
| Product Grade | Replacement Part |
| Automotive Fit Type | Vehicle Specific Fit |
This A-Premium assembly combines an aluminum housing, integrated oil cooler, new filter, and replacement seals into one unit intended to control oil temperature while filtering contaminants. In use it replaces the factory housing and attaches to the engine oil passages, letting the aluminum cooler dissipate heat more effectively than plastic housings and helping preserve oil viscosity under load. The package includes seals and a replacement filter so you can install the unit as a single service job. Buyers will appreciate the corrosion-resistant aluminum construction and the stated fitment references for matching part numbers before ordering. Important limitations are that this is a vehicle-specific replacement so fit must be verified against the Rogue’s original part number, and installation can be labor intensive because access and routing vary by engine bay. The listing also refers to OEM numbers rather than vehicle model coverage, so confirm compatibility before committing to a purchase.
Best for: Performance-oriented owners seeking a durable, higher-heat-capacity replacement who prioritize thermal control and engine longevity under load.
Less Ideal for: Buyers who need a universal or quick bolt-on part without cross-checking part numbers, or those unwilling to pay for a vehicle-specific replacement and possible professional installation.
- Aluminum construction improves heat transfer and resists corrosion compared with plastic housings.
- Includes oil cooler, housing, replacement filter and seals for a single-swap repair.
- Listed to replace known manufacturer part numbers for easier verification.
- Factory-style replacement design simplifies plumbing and reduces parts sourcing.
- Fitment is vehicle-specific and requires confirming the Rogue’s exact part number before purchase.
- Installation can be time-consuming and may require professional tools or service for tight engine bays.
Verdict Choose this aluminum oil cooler and housing when you want a factory-style, heat-managing replacement—just confirm exact part-number fitment for your Rogue before ordering.
4. INFINAUTO Engine Oil Filter Housing Assembly (Aluminum)
| Manufacturer | INFINAUTO |
|---|---|
| Manufacturer Part Number | IFN240318a001047 |
| Position | Front |
| ASIN | B0D3QLFV7S |
This aluminum oil filter housing assembly replaces the factory plastic housing and is designed to resist corrosion and heat that commonly cause cracks and oil leaks. It installs where the original housing mounts and is used during an oil service when you drain the oil, remove the old housing bolts and hoses, clean the gasket surface, and fit the new housing with a new gasket and bolts. The upgraded aluminum construction should hold up better to high under‑hood temperatures and reduce the risk of brittle failure compared with plastic housings, which helps avoid oil loss and potential engine damage. Practical benefits include a more durable housing and a straightforward swap for a mechanic or experienced DIYer. Limitations are that this is a direct replacement part with no included long-term performance testing or extended warranty details, and proper installation and torqueing are important to avoid leaks or bolt failure.
Best for: Budget-conscious owners focused on a lower-cost repair who prioritize replacing a brittle plastic housing with a more durable metal unit to reduce the chance of future leaks.
Less Ideal for: Drivers seeking a factory-backed replacement with documented long-term testing or those who prefer parts that include all service seals and filters in one kit.
- Aluminum alloy construction improves heat and corrosion resistance compared with plastic housings
- Sold as a single complete housing to replace a failed unit
- Marketed to fit common vehicle models covered by the original part number
- Simple remove-and-replace installation during routine oil service
- No warranty information provided with the listing
- Does not include a filter element or sealing gasket in the package description
Verdict A low-cost aluminum replacement housing that reduces the failure risk of plastic housings but lacks included seals and warranty details.
5. YITHSWAY Aluminum Engine Oil Cooler with Oil Filter Housing Adapter
| Material | Aluminum |
|---|---|
| Thread Size | M16 x 1.5 |
| Product Grade | Replacement Part |
| Automotive Fit Type | Vehicle Specific Fit |
| OEM Part Number | 68105583AF |
This aluminum engine oil cooler and filter housing assembly replaces the factory plastic unit and arrives as a mostly complete kit with the oil filter, pressure and temperature sensors, O-rings, gaskets, and mounting bolts. It is used where the original housing has cracked or begun leaking and is intended to restore cooling and oil routing for the engine. The machined aluminum construction improves heat resistance and reduces the chance of the common plastic-housing failures that lead to oil loss. Installation is typical for a 3.6L-style housing swap and reviewers report the gaskets and included sensors fit and function when installed correctly. Important limitations are that fitment is vehicle-specific and the product listing references many OEM part numbers you must confirm before buying, and long-term durability depends on correct torque and sealing procedure during installation. Buyers should also be prepared to bleed the cooling circuit if applicable after replacement.
Best for: A risk-averse mainstream buyer who wants a more durable, less failure-prone replacement than factory plastic housings and prefers a near-complete kit to minimize parts hunting.
Less Ideal for: Owners who prioritize an exact factory-original part or those unwilling to verify fitment and follow correct installation and sealing procedures should consider alternatives.
- Aluminum housing resists heat and warping compared with plastic replacements
- Includes oil filter, pressure and temperature sensors, O-rings, gaskets, and mounting bolts for a near drop-in install
- Machined exterior and reinforced construction reduce risk of leaks reported with factory plastic housings
- Multiple included seals and hardware simplify the repair and lower parts sourcing hassle
- Vehicle-specific fitment requires confirming compatible OEM part numbers before purchase
- Long-term performance depends on proper installation torque and sealing to avoid leaks
Verdict A practical aluminum upgrade kit that replaces failure-prone plastic housings, but confirm Nissan Rogue fitment and install carefully to avoid leaks.
6. GAOBEN Aluminum Engine Oil Filter Housing with Oil Cooler (926-876/926-959)
| Brand | GAOBEN |
|---|---|
| Material | Aluminum |
| Thread Size | M16 x 1.5 |
| Automotive Fit Type | Vehicle Specific Fit |
This GAOBEN oil filter housing replaces the common plastic assembly with a machined aluminum unit and an integrated oil cooler to address leak-prone factory housings. It is installed in place of the original housing and typically used when owners see oil seepage, coolant contamination, or cracked plastic housings. The aluminum body reduces the risk of cracking and warping and reviewers report it arrives with seals, sensors, and an oil filter in the box for a more complete repair. Several users noted solid fit and leak elimination after installation, though a few experienced mismatched sensor plug shapes that required swapping the original sensor or minor wiring work. Expect a more durable repair than a plastic replacement and potential extra time ensuring sensor connectors match your Rogue’s harness. This is a value-oriented, practical upgrade that trades the higher cost of a factory-style replacement for a more robust aftermarket aluminum assembly while requiring care during fitment.
Best for: Practical optimizers who want a durable, lower-cost upgrade to the factory plastic housing and are comfortable checking fitment details before installation.
Less Ideal for: Buyers who prefer a guaranteed plug-and-play factory replacement or who do not want to swap sensors or make minor wiring adjustments should consider an exact factory-style housing instead.
- Aluminum construction reduces likelihood of cracking and oil leaks compared with plastic housings.
- Includes seals and an oil filter to simplify the repair and reduce parts sourcing.
- Machined exterior indicates tighter tolerances and a more durable finish than molded housings.
- Integrated oil cooler replaces a failure-prone assembly in one unit, saving installation time over piecemeal repairs.
- Some units have sensor connector shape differences requiring reuse of the original sensor or minor connector modification.
- Fitment can vary between model years so verification against the Rogue’s exact connector and part numbers is necessary.
Verdict A budget-friendly, heavy-duty aluminum replacement that fixes leak-prone plastic housings but may need minor sensor or fitment checks for a perfect Nissan Rogue installation.
7. MNJWS Aluminum Oil Filter Housing and Oil Cooler Kit for 3.6L Pentastar Engines
| Material | Aluminum |
|---|---|
| Thread Size | M16 x 1.5 |
| Vehicle Service Type | 3.6L Pentastar applications (Chrysler/Dodge/Jeep/Ram) |
This MNJWS kit replaces the factory plastic oil filter housing and integrates an oil cooler to keep engine oil cooler and cleaner in 3.6L Pentastar-equipped vehicles. It is used when the original housing leaks, warps, or causes oil to pool under the vehicle. The housing is machined from reinforced aluminum, which improves heat resistance and corrosion resistance compared with the stock plastic piece, and the kit ships with seals, bolts, and an oil filter so you can swap the assembly in one job. In real-world use the aluminum body reduces the chance of future warping and several owners report straightforward installations and resolved leaks. A few buyers noted sensor plug differences and one example of an included sensor failing, so you may need to reuse your original sensor or buy a replacement and verify electrical fit before installation. Expect a DIY-friendly replacement that can save money over dealer parts but check sensor compatibility if having a shop do the swap to avoid diagnostic headaches.
Best for: Balanced buyers who want a durable, cost-effective upgrade to the stock plastic housing that reduces future leak risk and lowers long-term maintenance expense.
Less Ideal for: Buyers who prefer dealer-sourced parts with guaranteed shop warranty support or who need guaranteed sensor plug compatibility without modifications.
- Aluminum construction resists heat and corrosion better than factory plastic housings
- Includes gaskets, bolts and an oil filter for a one-piece replacement install
- Direct-replacement design aimed at matching factory fit and mounting locations
- Reported to stop common oil leaks on 3.6L Pentastar engines when installed correctly
- Some supplied sensors or plugs may not match vehicle connectors and could require reusing original sensors or buying replacements
- A few reported cases of included oil filter causing flow restriction so use a quality filter during installation
Verdict A budget-friendly, aluminum upgrade that fixes common 3.6L Pentastar oil housing leaks but double-check sensor compatibility before installation.
Choosing the Right Nissan Rogue Oil Filter Housing: Key Factors to Consider
Fitment and Mounting Accuracy
Exact fitment to the Nissan Rogue’s engine block and mounting points is critical because it determines whether the housing seals properly and aligns with oil passages. A housing that sits slightly off can stress bolts, distort seals, or create uneven pressure on the gasket surface.
When fitment is correct, installation is faster and torque specs hold more reliably, which reduces the chance of leaks and the need for rework. Confirming vehicle-year and engine variant compatibility matters because small dimensional differences affect sealing and bolt alignment.
Sealing Surfaces and Gasket Quality
The integrity of sealing surfaces and the supplied gasket or seal directly affects leak resistance and longevity. Smooth, machined sealing faces and a robust gasket material help maintain a consistent compressive seal, even as temperatures cycle.
Look for housings that either include a high-quality gasket or clearly specify compatible gasket part numbers. Consider whether the design uses an O-ring, flat gasket, or molded seal and how that choice influences replacement frequency and ease of installation.
Material Durability and Cracking Resistance
Materials must withstand engine bay heat, oil exposure, and mechanical stress without cracking or warping. Polymer housings can offer weight and cost advantages but must be formulated to resist long-term embrittlement. Metal housings may resist impact and temperature better but can corrode if not properly treated.
Assess how the housing design distributes stress around bolt bosses and ports, since thin sections or sharp transitions can become crack initiation sites. Durable materials reduce the likelihood of failure modes such as cracking under thermal cycling.
Leak Prevention and Oil Flow Integrity
A housing must maintain oil flow paths without restriction while preventing external leaks. Internal passage geometry should preserve consistent oil delivery to the filter and back to the engine, avoiding turbulence or dead volumes that can trap contaminants.
External sealing features, such as raised lips or integrated drains, can help manage potential leak paths. Consider housings designed to minimize the number of separate seals or fasteners that create additional failure points.
Serviceability and Ease of Filter Changes
How easy it is to change the oil filter affects maintenance time and the likelihood of correct reassembly. A housing that provides clear access to the filter element and fasteners reduces the chance of cross-threading, improper sealing, or missed torque steps.
Consider whether routine maintenance requires special tools, whether fasteners are conveniently located, and how straightforward gasket replacement is. Designs that simplify filter access tend to reduce shop time and decrease the risk of installation errors.
Parts Availability and Interchangeability
Availability of replacement gaskets, seals, and related parts influences long-term ownership convenience. Choose housings that reference standard part numbers or have widely available gasket kits so future repairs are straightforward.
Interchangeability with factory seals or the ability to source OEM-equivalent components helps when emergency repairs are needed. Verify that service parts like O-rings and gaskets are listed and obtainable without extensive delay.
FAQ
What are common symptoms of a failing oil filter housing on a Nissan Rogue?
Common signs often include visible oil leaks near the housing area, a drop in oil pressure, or oil appearing under the vehicle after parking. You may also notice oil on nearby engine components or a burning oil smell if oil contacts hot surfaces. These symptoms usually warrant inspection of the housing, gasket, and nearby connections.
Can I replace the oil filter housing myself?
Many owners can perform the replacement with basic mechanical skills, proper tools, and a clear workspace. Tasks include draining or safely containing residual oil, removing mounting fasteners, swapping seals or gaskets, and torquing bolts to specification. If you are uncomfortable with torque specs or access constraints, a professional technician can ensure correct installation.
How do I know if the housing seal or gasket needs replacement?
If you see oil weeping from the housing joint or loose fasteners that do not maintain torque, the gasket or seal may have degraded. Gaskets that look flattened, cracked, or oil-saturated are signs of failure. Routine inspection during oil changes can help catch seal degradation early before a significant leak develops.
What causes oil filter housing cracking?
Cracking often results from repeated thermal cycling, mechanical stress at thin sections or bolt bosses, or impact damage. Inferior materials or designs with stress concentrations are more susceptible. Proper installation with correct torque and using high-quality replacement parts can reduce the risk of cracking.
Is there a part number I should reference when replacing the housing?
Referencing the correct part number is important to ensure fitment for your specific Nissan Rogue model and engine. Check vehicle documentation or parts catalogs for the exact part number that matches your model year and engine variant. Using the correct part number reduces the chance of ordering a non-compatible housing.
Will replacing the housing stop persistent oil leaks?
Replacing a damaged housing or worn gasket often resolves persistent leaks when the housing is the source. However, it depends on whether the leak originates at the housing, a nearby seal, or a loose fastener. A careful inspection of mating surfaces and nearby components helps determine if housing replacement is the proper fix.
How We Chose the Best Nissan Rogue Oil Filter Housing
We focused on parts that are specifically designed to match the Nissan Rogue’s engine layout and mounting points. Key evaluation criteria included precise fitment to factory mounting surfaces, quality of sealing interfaces and gaskets, resistance to cracking under heat and pressure, and accessibility for routine filter changes. Durability against common failure modes such as leaks and warping was assessed conceptually through materials and design features. We also considered serviceability factors like how easy the housing makes filter access and whether common replacement seals and gaskets are available. We excluded universal or multi-fit housings that require aftermarket modification or significant adaptation. Also excluded were designs that lack clearly specified compatibility with the Nissan Rogue or that have known fitment ambiguity. The resulting list emphasizes housings that minimize installation risk, improve long-term sealing performance, and simplify maintenance.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing an oil filter housing for a Nissan Rogue, prioritize precise fitment, robust sealing surfaces, and material durability. These factors most directly influence leak resistance and long-term reliability. Balance serviceability and parts availability against material choices. Proper installation with correct gasket selection and torque practices reduces the risk of repeat issues and keeps routine maintenance straightforward.
Explore More:
- Check out all Nissan Rogue parts & accessories
- Explore Engine
- Browse all Auto Parts
